Abstract:Present approaches for the robust optimization of injection molding process parameters cannot thoroughly analyze the influence of uncontrollable factors due to the lack of outer experimental runs.And they are often single-objective optimization with no comprehensive evaluation on the characteristics of molded parts.To overcome these shortcomings,a novel multi-objective robust optimization method is proposed on the basis of parameter design using inner-outer array,analysis of signal to noise ratio(SNR) and the technique for order preference by similarity to ideal solution(TOPSIS).The principal process parameters that have the most significant influence on the part quality are firstly screened out by executing two-level orthogonal experiments and analysis of variance(ANOVA),and then both inner and outer orthogonal arrays can be designed by taking the errors of principal process parameters as noise factors.The quadratic polynomial models for predicting the part quality of given process parameter scheme are formulated on the basis of uniform experimental design and stepwise regression analyses,which are then utilized to efficiently compute the values of quality indices corresponding to all parameter schemes arranged according to the inner-outer array.Thus the SNR of every chosen quality index corresponding to all the parameter schemes of the inner array can be efficiently obtained,based on which the preference of all inner schemes are sorted and the most robust one can be determined.The feasibility of the proposed method is demonstrated by the robust optimization of the process parameters for the injection of a mobile phone panel.

Optimal Process Conditions During Filling Stage Based on DOE

Multi-objective Robust Optimization of Injection Molding Process Parameters Based on TOPSIS

Optimization of Plastic Injection Molding Process Parameters by Taguchi Optimization and CAE Technique

OPTIMIZATION OF INJECTION MOLDING PROCESS PARAMETERS BY TAGUCHI DOE TECHNIQUE

Process Optimization of Low-pressure Die Casting of Aluminum Alloy Wheel based on Taguchi Method

OPTIMUM DESIGN OF PROCESS PARAMETERS IN MICROCELLULAR FOAM INJECTION MOLDING

OPTIMAL PROCESS DESIGN CONSIDERING INTERACTIONS BETWEEN PROCESS PARAMETERS IN INJECTION MOLDING

Investigation of the Effect of Molding Variables on Sink Marks of Plastic Injection Molded Parts Using Taguchi DOE Technique

A Study on the Effects of Process Parameters on Swirl Marks of Microcellular Injection Molded PC Parts

Warpage analysis and optimization of thin-walled injection molding parts based on numerical simulation and orthogonal experiment

Optimization of a Commercial Injection-Moulded component by Using DOE and Simulation

Topological and Parameter Optimization Design on Front Platen of Injection Molding Machine

Research on Optimization of the Hot Embossing Process

Optimization of Control Parameters in Micro Hot Embossing

Optimization of Injection Molding Processing Parameters of Display Shell Based the Orthogonal Experiment

Numerical Optimization of Shrinkage and Warpage on the Injection Molding Process Parameters of Electrical Connector

Interaction among Process Parameters in Injection Molding

CAE-based Injection Process Analysis and Optimization Design of Mobile Phone Housing

Study on the Forming Process Parameters of Automobile Front Panel Reinforcing Plate Using Orthogonal Experiment Method by Numerical Simulation Technology

Optimize the Warpage of Injection Molding of Cover Based on Orthogonal Test

Process Parameters Optimization of Injection Molding Using a Fast Strip Analysis As a Surrogate Model