Abstract:Gel polymer electrolyte with high ionic conductivity and high lithium ion transference number for lithium-ion batteries attracts unremitting pursuit of scientists. For that, we develop a novel strategy of one-step reactive vapor-induced phase separation (RVIPS) to fabricate a porous polymer electrolyte (PPE) membrane from poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP). The polymer and a salt of lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) were first mixed in acetone, then the solution was cast under an ammonia water atmosphere to evaporate solvent. The porous microstructure of the obtained PPE membrane was carefully analyzed and was compared with that of the PPE membrane prepared under water vapor of a usual VIPS. Moreover, the electrochemical properties of the PPE membranes were measured. Our results indicate that the reactive vapor of ammonia water induced dehydrofluorination of PVDF-HFP to result in its cross-linking. The cross-linking together with the plasticizer effect of the incorporated LiTFSI suppresses the crystallization of PVDF-HFP, while enhancing the flexibility of the polymer chain segments. As a result, the PPE membrane containing 10% LiTFSI displays interconnected pores and takes up 240% liquid electrolyte, so as to possess an ionic conductivity as high as 1.32 × 10 –3 S cm −1 at 30 oC. In addition, battery tests demonstrate a high-rate ability and excellent cycle performance of the PPE membrane fabricated via the RVIPS. An initial capacity of 128 mAh∙g −1 , 97.7% capacity retention and 99.9% Coulombic efficiency at 1C after 120 cycles of the cell equipped with the PPE membrane undoubtedly indicate its promising potential.

A porous poly(vinylidene fluoride) gel electrolyte for lithium ion batteries prepared by using salicylic acid as a foaming agent

Gel-filling polymer electrolytes based on porous PVDF membrane for rechargeable lithium batteries

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

Preparation and Properties of Gel Membrane Containing Porous PVDF-HFP Matrix and Cross-Linked PEG for Lithium Ion Conduction

Preparation Of Pvdf/P(Mma-Co-Pegma) Porous Membranes Via Phase Inversion Process For Gel Polymer Electrolyte

Preparation of Porous, Chemically Cross-Linked, PVdF-based Gel Polymer Electrolytes for Rechargeable Lithium Batteries

UV-curable PVdF-HFP-based gel electrolytes with semi-interpenetrating polymer network for dendrite-free Lithium metal batteries

A Microporous Gel Electrolyte Based on Poly(vinylidene Fluoride-Co-hexafluoropropylene)/fully Cyanoethylated Cellulose Derivative Blend for Lithium-Ion Battery

Preparation Of Poly (Dimethylsiloxane) Graft (Poly(Propylene Oxide)-Block-Poly (Ethylene Oxide) Modified Pvdf Separator And Its Use In Lithium Ion Batteries

Polymer Electrolytes Based on Poly(Vinylidene Fluoride-Co-Hexafluoropropylene) with Crosslinked Poly(Ethylene Glycol) for Lithium Batteries

A Trilayer Poly(Vinylidene Fluoride)/Polyborate/Poly(Vinylidene Fluoride) Gel Polymer Electrolyte with Good Performance for Lithium Ion Batteries

Preparation and Properties of Poly (vinylidene Fluoride)/poly(dimethylsiloxane) Graft (poly(propylene Oxide)-Block-poly(ethylene Oxide)) Blend Porous Separators and Corresponding Electrolytes

Synthesis and Properties of Polyvinylidene Fluoride-Hexafluoropropylene Copolymer/Li6PS5Cl Gel Composite Electrolyte for Lithium Solid-State Batteries

High ionic conductive PVDF-based fibrous electrolytes

A Study on PVDF-HFP Gel Polymer Electrolyte for Lithium-Ion Batteries

In-situ Preparation of Gel Polymer Electrolyte with Glass Fiber Membrane for Lithium Batteries

A new strategy of PVDF based Li-salt polymer electrolyte through electrospinning for lithium battery application

Preparation of Poly(acrylonitrile–butyl Acrylate) Gel Electrolyte for Lithium-Ion Batteries

Multi‐scale Polyvinylidene Fluoride/Magnesium‐Aluminum Layered Double Hydroxide Gel Electrolytes for Lithium Batteries

Fabrication of a porous polymer electrolyte from poly(vinylidene fluoride-hexafluoropropylene) via one-step reactive vapor-induced phase separation for lithium-ion battery

Transparent PVDF-based electrolyte enabled by lipophilic lithium magnesium silicate for solid-state lithium batteries