Abstract:In this paper, we designed a novel core-shell composite for microwave absorption application in which the α-Fe2O3 and the porous CoFe2O4 nanospheres served as the core and shell, respectively. Interestingly, during the solvothermal process, the solvent ratio (V) of PEG-200 to distilled water played a key role in the morphology of α-Fe2O3 for which irregular flake, coin-like, and thinner coin-like forms of α-Fe2O3 can be produced with the ratios of 1:7, 1:3, and 1:1, respectively. The porous 70 nm diameter CoFe2O4 nanospheres were generated as the shell of α-Fe2O3. It should be noted that the CoFe2O4 coating layer did not damage the original shape of α-Fe2O3. As compared with the uncoated α-Fe2O3, the Fe2O3@CoFe2O4 composites exhibited improved microwave absorption performance over the tested frequency range (2-18 GHz). In particular, the optimal reflection loss value of the flake-like composite can reach -60 dB at 16.5 GHz with a thin coating thickness of 2 mm. Furthermore, the frequency bandwidth corresponding to the RLmin value below -10 dB was up to 5 GHz (13-18 GHz). The enhanced microwave absorption properties of these composites may originate from the strong electron polarization effect (i.e., the electron polarization between Fe and Co) and the electromagnetic wave scattering on this special porous core-shell structure. In addition, the synergy effect between α-Fe2O3 and CoFe2O4 also favored balancing the electromagnetic parameters. Our results provided a promising approach for preparing an absorbent with good absorption intensity and a broad frequency that was lightweight.

Enhanced Microwave Absorption of Fe Nanoflakes after Coating with SiO2 Nanoshell.

Microwave Absorbing Capability of FeSi Nano-crystalline Flakes

Interface engineering in the hierarchical assembly of carbon-confined Fe<sub>3</sub>O<sub>4</sub> nanospheres for enhanced microwave absorption

Optimized impedance matching and enhanced microwave absorbing performance of porous flaky Fe4N wrapped with SiO2

Microwave absorbing capability of Fe85Si1Al6Cr8 nanocrystalline flakes

Tunable Shell Thickness of Fe-N@SiO2 Nanoparticles for Strong and Stable Microwave Absorption Properties with Enhanced Oxidation Resistance

Microwave absorbing capability of nanocrystalline flakes

Effect of SiO2 on the electromagnetic characteristics of lossy CoFeB-SiO2 nanogranular films

Exceeding natural resonance frequency limit and enhanced microwave absorption performance of Fe3O4 nanorods coated with SiO2 layer

The enhanced microwave absorption property of CoFe(2)O(4) nanoparticles coated with a Co(3)Fe(7)-Co nanoshell by thermal reduction

Core–Shell Structured Silica-Coated Iron Nanowires Composites for Enhanced Electromagnetic Wave Absorption Properties

1D Magnetic Materials of Fe 3 O 4 and Fe with High Performance of Microwave Absorption Fabricated by Electrospinning Method

Enhanced low-frequency microwave absorption performance of FeNi alloy coated carbon foam assisted by SiO2 layer

Electromagnetic and Microwave Absorption Properties of Surface Modified Fe–Si–Al Flakes with Nylon

FeSiCr@ZnFe2O4 core-shell nanostructure and properties enhancement on microwave absorption

Co7Fe3 and Co7Fe3@SiO2 Nanospheres with Tunable Diameters for High-Performance Electromagnetic Wave Absorption.

Suppressed conductive loss of flower-like NiCo2O4-wrapped flaky FeSiAl for excellent low-frequency microwave absorption

Tuning the shell thickness of core-shell α-Fe2O3@SiO2 nanoparticles to promote microwave absorption

High efficiency fabrication of Co nanosheets deposited by SiO2 layer with controllable permittivity toward superior electromagnetic wave absorption

Coin-like Α-Fe2o3@cofe2o4 Core–Shell Composites with Excellent Electromagnetic Absorption Performance

Enhanced Electromagnetic Wave Absorption of Fe‐doped Silicon Oxycarbide Nanocomposites