Synthesis, oxidation resistance and microwave absorbing properties of FeCo-based heterostructures
Yingli Zhu,Xiangcheng Li,Pingan Chen,Boquan Zhu,Yingli Zhu,Xiangcheng Li,Pingan Chen,Boquan Zhu
DOI: https://doi.org/10.1016/j.ceramint.2020.06.175
IF: 5.532
2020-10-01
Ceramics International
Abstract:<p>The fabrication of a shell on the surfaces of ferromagnetic particles has been proved to be an efficient approach to tailoring and improving the electromicrowave (EM) absorption. In this study, core–shell composites (<sub>2</sub>/TiO<sub>2</sub>, <sub>2</sub>@TiO<sub>2</sub>) were designed and fabricated by facile hydrolysis reactions. In these novel composites, the combined effects of the characteristics of each component result in excellent properties. The FeCo core exhibits strong magnetic loss, and the SiO<sub>2</sub>/TiO<sub>2</sub> shell not only acts as an impedance matching medium, but also exhibits excellent dielectric loss. Moreover, the SiO<sub>2</sub> and TiO<sub>2</sub> can efficiently limit direct contact between FeCo particles and protect the FeCo core from oxidation at high temperature. The <sub>2</sub>, <sub>2</sub>, and <sub>2</sub>@TiO<sub>2</sub> absorbers exhibit enhanced EM absorption, with maximum reflection losses (RL<sub>max</sub>) of −38.49, −36.53, and −33.72 dB at thicknesses <em>d</em> of 2, 5, and 3 mm, respectively, compared to −19.23 dB for FeCo single particles (<em>d</em> = 5 mm). The improvement is due mainly to the improved impedance matching and multiple interfacial polarization. In particular, after annealing at 500 °C, the RL<sub>max</sub> values of the <sub>2</sub>, <sub>2</sub>, and <sub>2</sub>@TiO<sub>2</sub> absorbers are −25.41, −24, and −32.38 dB at thicknesses of 3, 3, and 5 mm, respectively, which are much higher than that of uncoated FeCo (−1.39 dB, <em>d</em> = 5 mm). These findings demonstrate that the fabricated FeCo-based core–shell structures can be good candidates for use as room- and high-temperature EM absorbers.</p>
materials science, ceramics