Abstract:Thermal, mechanical and tribological properties of carbon fabric/resin laminated composites containing carbon fiber powder with different densities. Carbon fabric/resin laminated composites (CFRC) are extensively used in aerospace, transportation, and other fields owing to their superiorities of lightweight, high strength, and convenient integral molding. Therefore, strong interlaminar binding and prominent wear resistance are urgent requirements for avoiding premature failure of laminated materials in harsh working environments. To elevate the superficial wear resistance and interlaminar bonding strength of composites simultaneously, the modified composites were obtained by introducing carbon fiber powder (CFP) with different densities on the surface of the composites and between layers. The experimental results indicate that CFP can be evenly distributed in the interlaminar resin enrichment zone of the sample (CFRC‐40) when the deposition density is 40 g/m2. Consequently, CFRC‐40 presents optimal thermal conductivity owing to better heat transfer bridges between layers of the composite established by CFP. At the same time, the mechanical properties such as the tensile, impact, and interlaminar shear strengths of CFRC‐40 are improved by 42.8%, 10.2%, and 8.5%, respectively, compared with the original CFRC, which are attributed to the absorption of crack propagation energy and the inhibition of crack propagation by CFP. Furthermore, the dynamic friction coefficient maintains at a high level after introducing CFP with a density of 40 g/m2, while the wear rate significantly decreases by 61.2% from 12.99 × 10−14 m3(N m)−1 to 5.04 × 10−14 m3(N m)−1. This study proposes an innovative strategy to improve the interlaminar bonding of carbon fabric/resin laminated composite, which is conducive to obtaining composite with excellent mechanical and tribological properties. Highlights A facile and effectual method was adopted to introduce carbon fiber powder (CFP) into the interlamination and surface of the composites simultaneously. The mechanical properties and abrasive resistance of the composites were obviously strengthened by regulating the content and distribution of CFP. CFP at a certain scale, could not only hinder the propagation of cracks but also alleviate the surface wear and extend the service life of composites.

STUDY ON PREPARATION AND DENSIFICATION OF CARBON FIBER/CARBON FOAM PREFORM

Preparation and Damping Properties of Cups-Stacked Carbon Nanotubes(Cscnts)/Prime 20

EFFECT OF CARBON NANOFIBERS ADDITION ON DENSIFICATION AND MECHANICAL PROPERTIES OF CARBON/CARBON COMPOSITES

PREPARATION AND MECHANICAL PROPERTIES OF CARBON NANOTUBES/RESIN EPOXY COMPOSITE

Body volume measurement in female college students and selection of optimal regression equations in Zhejiang province

Research on Electrical Properties of Carbon Filled Conductive Composites

Preparation of High-Performance Carbon Fiber-Reinforced Epoxy Composites by Compression Resin Transfer Molding

Effect of carbon fiber reinforcement on the compressive and thermal properties of hollow glass microspheres/epoxy syntactic foam

Effects of preform structure on microstructure and mechanical properties of long/short fiber‐coupled C/C–SiC composites

Preparation of fixed length carbon fiber reinforced plastic composite sheets with isotropic mechanical properties

Preparation and Characterization of SiO2/Carbon Foam and SIC/Carbon Foam Composites

Fabrication of carbon fiber reinforced aluminum matrix composites by inorganic binders

Effects of Carbon Fiber Content on the Crystallization and Rheological Properties of Carbon Fiber-Reinforced Polyamide 6

Improving mechanical and tribological properties of carbon fabric/resin laminated composites by carbon fiber powder

Mechanical Enhancement of Carbon Fiber/Epoxy Composites Based on Carbon Nano Fibers by Using Spraying Methodology

Improving carbon/carbon composites mechanical and thermal properties by the co‐carbonization of pre‐oxidized carbon fiber and pitch

Study on the Preparation and Process Parameter-Mechanical Property Relationships of Carbon Fiber Fabric Reinforced Poly(Ether Ether Ketone) Thermoplastic Composites

PREPARATION PROCESS AND INTERFACE MODIFICATION ON THE MECHANICAL PROPERTIES OF BAMBOO FIBER/ POLYPROPYLENE CARBONATE COMPOSITES

A New Vacuum Pressure Infiltration CFRP Method and Preparation Experimental Study of Composite

Preparation And Performance Evaluation Of Carbon Fiber/Epoxy Composites Modified With Graphene Prepregs

Effect of Surface Treatment of Carbon Fiber on the Mechanical Properties of C-f/SiO2 Composite