Abstract:Adding conductive fillers to an insulating polymer matrix produces composites with unique properties. Varying amounts of carbon black (0.33, 0.67, and 1 wt%) and graphene nanoplatelets (5, 10, 15, and 20 wt%) were added to epoxy. In addition, a few carbon black/graphene nanoplatelet/epoxy formulations were also fabricated. The conductivity and tensile properties were determined and analyzed. The single filler composites containing 5 and 10 wt% graphene nanoplatelet and 0.33 wt% carbon black could be used for electrically insulating applications. Composites containing 15 and 20 wt% graphene nanoplatelet could be used for static dissipative applications. The following composites could be used for semi-conductive applications: 0.67 wt% carbon black/epoxy, 1 wt% carbon black/epoxy, 0.33 wt% carbon black/5 wt% graphene nanoplatelet/epoxy, and 0.33 wt% carbon black/10 wt% graphene nanoplatelet/epoxy. At the 95% confidence level, the combination of 0.33 wt% carbon black with 5 wt% graphene nanoplatelet caused the composite electrical resistivity (1/electrical conductivity) to significantly decrease from ∼10 15 ohm-cm to ∼10 4 ohm-cm. It is likely that the highly branched, high surface area carbon black is forming an electrically conductive network with graphene nanoplatelets. Concerning single filler composites, adding ≤1 wt% carbon black did not significantly lower the composite tensile strain; however, adding graphene nanoplatelet did decrease tensile strain and increase modulus. One possible application for the 10 wt% graphene nanoplatelet/epoxy composite is in Polymer Core Composite Conductors for power transmission lines, which need to be electrically insulating, have improved thermal conductivity (increased from 0.2 to 0.3 W/m-K), increased tensile modulus (increased from 2.7 to 3.3 GPa), and good tensile strength (70 MPa) and strain (3.3%).

Research on Electrical Properties of Carbon Filled Conductive Composites

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Electric Conductivity and Thermorheology Properties of Polyacrylonitrile/Nylon6 Composites Filled with Carbon Black

Conductivity and piezoresistivity of conductive carbon black filled polymer composite

Effect of graphite and its surface modification on thermal conductivity of silicone rubber

Resistance-mechanical Effect of Polymer-Matrix Conducting Composites

Electrical and rheological properties of carbon black and carbon fiber filled low-density polyethylene/ethylene vinyl acetate composites

Conducting Property of Unsaturated Polyester Composite

Electrical Property and Microstructure Analysis of Poly(vinylidene Fluoride)-Based Composites with Different Conducting Fillers

Effect of Secondary Carbon Nanofillers on the Electrical, Thermal, and Mechanical Properties of Conductive Hybrid Composites Based on Epoxy Resin and Graphite

Dielectric properties of the polymer based composites filled by the different conductivities fillers

Electro-Mechanical Properties of Carbon Black Filled Ep/Pi Conductive Films

I-V Characteristic and Mechanism of Carbon Black Filled Epoxy Resin Matrix Composites

Effect of Electrically Inert Particulate Filler on Electrical Resistivity of Polymer/Multi-Walled Carbon Nanotube Composites

Influence of the Dispersion of Carbon Black on the Resistivity and Electromechanical Properties of Carbon Black Filled Epoxy Matrix Conductive Composites

Tensile and conductivity properties of epoxy composites containing carbon black and graphene nanoplatelets

Study on Electrical Resistivity Calculation and Conductivity Mechanism of Conductive Silicon Rubber Filled with Carbon Black

PIEZORESISTIVITY OF CONDUCTIVE COMPOSITES FILLED BY CARBON BLACK PARTICLES

Effect of interfacial properties of filled carbon black nanoparticles on the conductivity of nanocomposite

Electrical conductivity and rheological properties of carbon black based conductive polymer composites prior to and after annealing

Development of the Conductive Polymer Matrix Composite with Low Concentration of the Conductive Filler