Abstract:Adding conductive fillers to an insulating polymer matrix produces composites with unique properties. Varying amounts of carbon black (0.33, 0.67, and 1 wt%) and graphene nanoplatelets (5, 10, 15, and 20 wt%) were added to epoxy. In addition, a few carbon black/graphene nanoplatelet/epoxy formulations were also fabricated. The conductivity and tensile properties were determined and analyzed. The single filler composites containing 5 and 10 wt% graphene nanoplatelet and 0.33 wt% carbon black could be used for electrically insulating applications. Composites containing 15 and 20 wt% graphene nanoplatelet could be used for static dissipative applications. The following composites could be used for semi-conductive applications: 0.67 wt% carbon black/epoxy, 1 wt% carbon black/epoxy, 0.33 wt% carbon black/5 wt% graphene nanoplatelet/epoxy, and 0.33 wt% carbon black/10 wt% graphene nanoplatelet/epoxy. At the 95% confidence level, the combination of 0.33 wt% carbon black with 5 wt% graphene nanoplatelet caused the composite electrical resistivity (1/electrical conductivity) to significantly decrease from ∼10 15 ohm-cm to ∼10 4 ohm-cm. It is likely that the highly branched, high surface area carbon black is forming an electrically conductive network with graphene nanoplatelets. Concerning single filler composites, adding ≤1 wt% carbon black did not significantly lower the composite tensile strain; however, adding graphene nanoplatelet did decrease tensile strain and increase modulus. One possible application for the 10 wt% graphene nanoplatelet/epoxy composite is in Polymer Core Composite Conductors for power transmission lines, which need to be electrically insulating, have improved thermal conductivity (increased from 0.2 to 0.3 W/m-K), increased tensile modulus (increased from 2.7 to 3.3 GPa), and good tensile strength (70 MPa) and strain (3.3%).

Electro-Mechanical Properties of Carbon Black Filled Ep/Pi Conductive Films

Effects of Hygrothermal Aging and Cyclic Compressive Loading on the Mechanical and Electrical Properties of Conductive Composites

I-V Characteristic and Mechanism of Carbon Black Filled Epoxy Resin Matrix Composites

Effects of Carbon Black Content on Microwave Absorbing and Mechanical Properties of Linear Low Density Polyethylene/Ethylene-Octene Copolymer/Calcium Carbonate Composites

I–V Characteristics and Electro-Mechanical Response of Different Carbon Black/epoxy Composites

Electric Conductivity and Thermorheology Properties of Polyacrylonitrile/Nylon6 Composites Filled with Carbon Black

Research on Electrical Properties of Carbon Filled Conductive Composites

Influence of the Dispersion of Carbon Black on the Resistivity and Electromechanical Properties of Carbon Black Filled Epoxy Matrix Conductive Composites

Electric breakdown of carbon black reinforced epoxy nanocomposites

High-Density Polyethylene/Carbon Black Conductive Composites. I. Effect of Cb Surface Modification on Its Resistivity-Temperature Behavior

Electrical and rheological properties of carbon black and carbon fiber filled low-density polyethylene/ethylene vinyl acetate composites

Conductivity and piezoresistivity of conductive carbon black filled polymer composite

Electrical conductivity and rheological properties of carbon black based conductive polymer composites prior to and after annealing

EXTERNAL FIELD DEPENDENCE OF RESISTIVITY FOR CARBON BLACK OR GRAPHITE FILLED POLYETHYLENE CONDUCTIVE COMPOSITES

Rheological Behavior of Carbon Black Filled Polystyrene Melts

Effect of Surface Modifications of Carbon Black (CB) on the Properties of CB/polyurethane Foams

Effect of Secondary Carbon Nanofillers on the Electrical, Thermal, and Mechanical Properties of Conductive Hybrid Composites Based on Epoxy Resin and Graphite

Investigate Of Electrical Conductivity Of Shape-Memory Polymer Filled With Carbon Black

Tensile and conductivity properties of epoxy composites containing carbon black and graphene nanoplatelets

Selective Localization of Carbon Black in Bio-Based Poly (Lactic Acid)/Recycled High-Density Polyethylene Co-Continuous Blends to Design Electrical Conductive Composites with a Low Percolation Threshold

Morphology and physical properties of composites based on high-density polyethylene/propylene-ethylene random copolymers blends and carbon black