Abstract:In this chapter, the forming process of ceramics by gelling of agarose, gelatine and sodium algaecide has been presented, and another gel-casting system with low toxicity by using HEMA is also described. This study shows that gelled green bodies by the addition of agarose of 0.7 - 1.05 wt% and a solid loading of 53 - 55 vol% had a homogeneous density distribution and a green strength >3 MPa. Some simple and complex parts, such as a turbine rotor, were formed by this method. Gelatine can be dissolved in water above 40 degrees C, and the solutions gel at 15 - 20 degrees C. Wet green compacts can be formed from the alumina slurry containing 4 - 5 wt% gelatine (based on water) by gelation. A novel casting method by gelatine and enzyme catalysis is also described. As urease is added into the suspension, the gelatine molecules attract each other and change to a three-dimensional (3D) network structure through hydrogen bonding due to urea decomposition by urease. Then the slurry containing ceramic powder and gelatine will be consolidated in-situ by the gelation under ambient conditions. For the another gel-casting process by alginate, in which solidified agent and chelator are added into sodium alginate solution simultaneously; thus, the gelation between calcium ions and sodium alginate is avoided in this stage before casting. Free calcium ions are released when hexanedioic acid is added into the suspension. They react with sodium alginate and form a 3D network. Therefore, ceramic particles are fixed in this 3D network. The slurry is consolidated and near-net-shape green parts are formed. In addition, a new low toxic gel-casting system has been successfully developed by using HEMA or HEMA-PVP, by which dense and homogeneous complex-shaped alumina and silicon carbide parts have been successfully fabricated.

Ceramic forming based on gelation principle and process of sodium alginate

Ceramic in-situ forming based on gelation of sodium alginate

New gel-casting process for alumina ceramics based on gelation of alginate

Fabrication of Alumina Green Body Through Gelcasting Process Using Alginate

Natural additives in protein coagulation casting process for improved microstructural controllability of cellular ceramics

Alumina casting based on gelation of gelatine

Gelcasting of silicon carbide based on gelation of sodium alginate

Gelation Forming Process for Toxicity-Free or Low-Toxicity System

Gelcasting of alumina suspension using gellan gum as gelling agent

Gelcasting of Alumina Ceramic Components in Nontoxic Na-alginate–CaIO3–PVP Systems

A Novel Casting Forming for Ceramics by Gelatine and Enzyme Catalysis

Room-temperature Gelcasting of Alumina with Tartaric Acid and Glutaraldehyde

Gelcasting of Alumina Ceramic in Presence of Water-Soluble Polymer

Gel-casting Without De-Airing Process Using Silica Sol As a Binder

Processing of Al2O3 sheets by the gel–tape-casting process

Rheological Behavior of Alumina Aqueous Suspension for Extrusion Gelation Freeform Fabrication

Gelcasting of alumina ceramics in the mixed acrylamide and polyacrylamide systems

A Novel Gelcasting of Alumina Suspension Using Curdlan Gelation

GELCASTING OF ALUMINA SLURRY DISPERSED IN SILICA SOL WITHOUT DE-AIRING PROCESS

Improved Gelcasting

Suppression of Surface-Exfoliation by Gelcasting Ceramics with Mixed Polymer-Monomer Solutions