Abstract:This work is devoted to the development and validation of a new 3D DEM-based (Euler-Lagrange) model for the steam reforming of methane in a tube filled with spherical catalyst particles (Ni/<math>α</math>-Al2O). The new model includes five gaseous chemical species (CH4, CO2, CO, H2O, H2). The model uses reaction rate expressions taken from the literature (Langmuir-Hinshelwood-Hougen-Watson (LHHW) kinetics). The main novelty of the model is its ability to account for the intraparticle heat and mass transfer for each individual particle coupled with the heat and mass transfer between the particles and the bulk flow. The model is validated against results from a comprehensive particle-resolved 3D-CFD-based model published in the literature. This 3D benchmark case corresponds to a 0.7 m length of packed tube, that consists of 807 spherical catalyst particles at a tube-to-particle diameter ratio of <math>N=5.96</math>. The comparison between our DEM-based model and 3D benchmark results demonstrates a good agreement comprising of 4 K (1%) difference in the temperature of outflow gas phase and up to 3% differences in the composition of outflow gas. Additionally, this new model is compared with a partial equilibrium model, which uses chemical equilibrium inside the catalyst particles and mass transfer rates between the particle surface and gas flow to calculate the reaction rate expressions. The performances of these new models are illustrated using additional simulations for the same packed bed taking into account thermal radiation. Finally, we validate our model against 2D simulations of an industrial scale reformer-tube published in the literature. Good agreements were demonstrated.

Simulation of Natural Gas Steam Reforming Furnace

Modeling and Simulation of Commercial Catalytic Reformers

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Numerical Simulation of Natural Gas Non-Catalytic Partial Oxidation Reformer

Simulation Analysis and Optimization of Steam Reforming Process for A Large-Scale Ammonia Plant

Multi-dimensional modeling of non-catalytic partial oxidation of natural gas in a high pressure reformer

Simulation of Non-Catalytic Partial Oxidation and Scale-Up of Natural Gas Reformer

Numerical Analysis of Steam Reformer of Steam Methane Reforming Hydrogen Production System Connected with High Temperature Gas Cooled Reactor

Performance Simulation of Natural Gas Pre-reforming Solid Oxide Fuel Cell

PERFORMANCE ANALYSIS FOR NATURAL GAS REFORMING SOFC/MGT HYBRID DISTRIBUTED ENERGY SYSTEM

Modeling of Non-Catalytic Partial Oxidation of Natural Gas under Conditions Found in Industrial Reformers

Initial Study on Steam Reformer of High-Temperature Gas-Cooled Reactor Powered Steam Methane Reforming Hydrogen Production System

DEM-based model for steam methane reforming

Simulation and experimental analysis on the development of a co-axial cylindrical methane steam reformer using an electrically heated alumite catalyst

Simulation of Sorption-Enhanced Steam Methane Reforming over Ni-Based Catalyst in a Pressurized Dual Fluidized Bed Reactor

Numerical simulation on flow and reaction characteristics for catalytic region in helium-heated steam reformer coupled with HTR-10

Numerical simulation of coal gasification in OMB coal gasifier

Modeling and Performance Analysis of Gas Auto-Thermal Reformer