Abstract:The addition of nanoparticles can greatly improve the mechanical properties of ceramic materials at room temperature, but the research on the toughening and strengthening effect of nanoparticles at high temperature is less reported. In this paper, the evolution law and evolution mechanisms of the mechanical properties including Vickers hardness, fracture toughness and flexural strength as well as elastic modulus of TiC nanoparticles dispersed Al2O3/SiCw ceramic materials (Al2O3/SiCw/TiCn) at high temperature (up to 1200 degrees C) were meticulously investigated compared with those of Al2O3/SiCw. The results showed that the Vickers hardness and fracture toughness of Al2O3/SiCw/TiCn were higher than those of Al2O3/SiCw ceramic materials at both room and elevated temperature. Although the flexural strength of the Al2O3/SiCw ceramic materials was improved by the addition of nanoparticles at room temperature, the intergranular fracture tended to occur along the refined matrix grains at high temperature, resulting in lower high temperature flexural strength of Al2O3/SiCw/TiCn composite. The Vickers hardness of both the two composites decreased with increasing temperature (20-1000 degrees C). At 1000 degrees C, the hot hardness of the composite with TiC nanoparticles addition was still maintained 68.4% of hardness at room temperature. The fracture toughness of the two composites decreased rapidly from 900 degrees C above but increased to a peak at 1200 degrees C. The addition of TiC nanoparticles played a positive role for improving the hot hardness and high temperature fracture toughness, but was not conducive to the high temperature flexural strength. (c) 2017 Elsevier B.V. All rights reserved.

Preparation and Characterization of Si3n4/Tin Nanocomposites Ceramic Tool Materials

Study on the mechanical properties, microstructure and oxidation resistance of Si3N4/Si3N4W/Ti(C7N3) nanocomposites ceramic tool materials

Study of the mechanical properties, toughening and strengthening mechanisms of Si3N4/Si3N4w/TiN nanocomposite ceramic tool materials

High-temperature oxidation behavior and mechanism of Si3N4/Si3N4w/TiN nanocomposites ceramic cutting tool materials

Microstructure And Mechanical Properties Of Sic Ceramic Toughened With Tin Nanoparticles

Preparation and Properties of Nano-Sic-Based Ceramic Composites Containing Nano-Tin

Enhanced Performance in Si3N4 Ceramics Cutting Tool Materials by Tailoring of Phase Composition and Hot-Pressing Temperature

Optimization of sintering parameters for fabrication of Al2O3/TiN/TiC micro-nano-composite ceramic tool material based on microstructure evolution simulation

Microstructure and Mechanical Properties of Ceramic Tool Materials TiB2 -Tin

Effects of Ti(C, N) addition on the microstructure and mechanical properties of spark plasma sintered Si3N4/Ti(C, N) ceramic tool material

Study on Mechanical Properties of Multi-Scale and Multi-Phase Nanocomposite Ceramic Tool Materials

Mechanical properties and microstructure of Al2O3-TiB2-TiSi2 ceramic tool material

Preparation and characterization of Si3N4-based composite ceramic tool materials by microwave sintering

Effect of metal phases on microstructure and mechanical properties of Si3N4-based ceramic tool materials by microwave sintering

Preparation and properties of TiN–Si3N4 composites

Fabrication and Mechanical Properties of Al2O3-SiCw-TiCnp Ceramic Tool Material

Fabrication and Mechanical Properties of Homogenous and Graded Si<sub>3</sub>N<sub>4</sub>/(W, Ti)C Nano-Composite Ceramic Tool Materials

Sintering Behavior, Microstructure and Mechanical Properties of Silicon Carbide Ceramics Containing Different Nano-Tin Additive

Microstructure, mechanical properties and strengthening mechanism of in-situ synthesized TiC/6061 nanocomposites

Evolution Mechanisms of High Temperature Mechanical Properties and Microstructures of Al2O3/SiCw/TiCn Nanocomposite Materials

Effect of nano-TiC addition on sinterability and mechanical properties of TiC high temperature ceramics