Abstract:With dramatic reduction in sizes of microelectronic devices, the characteristic width and thickness of interconnects in large-scale integrated circuits have reached nanometer scale. Thermal fatigue damage of so small interconnects has attracted more and more attentions. In this work, thermal fatigue of Au interconnects, 35 nm thick and 0.1-5 μm wide, is investigated by applying various alternating current densities to generate cycling temperature and strain in them. A multi-probe measuring system is installed in a scanning electron microscope and a probe-type temperature sensor is for the first time introduced into the system for real-time measuring the temperatures on the pads of the tested interconnects. A one-dimensional heat conduction equation, which uses measured temperatures on the pads as boundary conditions and includes a term of heat dissipation through the interface between the interconnect and the oxidized silicon substrate, is proposed to calculate the time-resolved temperature distribution along the Au interconnects. The measured fatigue lifetimes are presented versus current density and thermal cyclic strain, and the results show that narrower Au lines are more reliable. The failure mechanism of those Au interconnects differs from what is observed in thick interconnects with relatively larger grain size. Topography change caused by localized plasticity on the less-constrained surfaces of the interconnects have not been observed. Instead, grain growing and reorienting due to local temperature varying appear, and grain boundary migration and mergence take place during high temperature fatigue in such thin and narrow interconnects. These results seem to reflect a strain-induced boundary migration mechanism, and the damage morphology also suggests that fatigue of the interconnects with decreased grain size and film thickness is controlled by diffusive mechanisms and interface properties rather than by dislocation glide. Open circuit eventually took place by melting at a region of severely damage cross-sectional area with the grain growing and reorienting.

Unusual Thermal Fatigue Behaviors in 60 Nm Thick Cu Interconnects

Microstructural analysis of the thermal fatigue tested Be/CuCrZr joint with artificial defects between Ti/Cu interlayers

Low cycle fatigue behavior of nickel-based superalloy GH4145/SQ at elevated temperature

Alternating-current induced thermal fatigue of gold interconnects with nanometer-scale thickness and width.

A Study of the Back Stress and the Friction Stress Behaviors of Ti-6Al-4V Alloy During Low Cycle Fatigue at Room Temperature

Modeling Thermal Fatigue in Anisotropic Sn-Ag-Cu/Cu Solder Joints

Thermal fatigue failure mechanism in the joint of nano Cu/Ti–Si 3 N 4 ceramic substrates after thermal fatigue test

1216 Nano-Scale Strength Analysis by EBSD and AFM Hybrid Method in Ultrafine-Grained Copper Processed by ECAP

A Molecular Dynamics Investigation of the Effect of Pressure and Orientation on the Cu Consumption in Cu-Cu3Sn Interface under Isothermal Ageing and Its Dissipative Mechanisms during Traction

Fatigue tolerance of nanostructured Cu/interlayer bilayers: Tuned by heterogeneous interface

Enhancement of fatigue resistance by recrystallization and grain growth to eliminate bonding interfaces in Cu–Cu joints

The Effects of Alternating Current on Deformation and Failure of 60 Nm-Thick Nanocrystalline Cu Lines

Effect of Ag agglomeration-driven nanovoids formation on fatigue reliability of Cu–Ag alloy flexible interconnects

Low cycle fatigue behavior of precipitation-strengthened Cu-Cr-Zr contact wires

Fatigue behaviour analysis of thermal cyclic loading for through-silicon via structures based on backstress stored energy density

The Effects of Interlayer Size and Crystallinity on Fatigue Behavior of Cu/X (X= Cr, Amorphous CuZr) Bilayers

Fatigue Behavior of 3D Stacked Packaging Structures under Extreme Thermal Cycling Condition

Fatigue Behaviors and Dislocation Evolution of Copper and Aluminum Alloy

On high‐cycle fatigue anisotropy of an aluminum alloy super‐thick plate

Fatigue-free Cu films on wrinkled soft substrates

Interfacial Anti-Fatigue Effect in Graphene-Copper Nanolayered Composites under Cyclic Shear Loading