Abstract:Polycrystalline ZnS is a typical infrared optical material. It is widely used in advanced optical systems due to its excellent optical properties. The machining accuracy of polycrystalline ZnS optical elements must satisfy the requirements of high-performance system development. However, the soft and brittle nature of the material poses a challenge for high-quality and efficient machining. In recent years, in situ laser-assisted diamond cutting has been proven to be an effective method for ultra-precision cutting of brittle materials. In this study, the mechanism of in situ laser-assisted cutting on ultra-precision cutting machinability enhancement of ZnS was investigated. Firstly, the physical properties of ZnS were characterized by high-temperature nanoindentation experiments. The result revealed an increase in ductile machinability of ZnS due to plastic deformation and a decrease in microhardness and Young's modulus at high temperatures. It provided a fundamental theory for the ductile–brittle transition of ZnS. Subsequently, a series of diamond-cutting experiments were carried out to study the removal mechanism of ZnS during in situ laser-assisted cutting. It was found that the mass damage initiation depth groove generated by in situ laser-assisted cutting increased by 57.99% compared to the groove generated by ordinary cutting. It was found that micron-sized pits were suppressed under in situ laser-assisted cutting. The main damage form of HIP-ZnS was changed from flake spalling and pits to radial cleavage cracks. Additionally, the laser can suppress the removal mode difference of different grain crystallographic and ensure the ductile region processing. Finally, planning cutting experiments were carried out to verify that a smooth and uniform surface with Sa of 3.607 nm was achieved at a laser power of 20 W, which was 73.58% better than normal cutting. The main components of roughness were grain boundary steps and submicron pit. This study provides a promising method for ultra-precision cutting of ZnS.

Mechanical properties of ZnS nanobelts.

In Situ Mechanical Resonance Behaviour of Pristine and Defective Zinc Blende GaAs Nanowires

First-Principles Calculations for Elastic Properties of ZnS under Pressure

Morphology-tuned wurtzite-type ZnS nanobelts

Anisotropic Plastic Deformation Mechanism and Indentation Size Effect During Berkovich Nanoindentation Process of ZnSe Crystals in Micro-nanoscale

Effect of Surface Morphology on the Mechanical Properties of ZnO Nanowires

Structural and Optical Properties of the Zns Nanobelts Grown on Zn Foil Via A Simple Method

Mechanical deformation of single-crystal ZnO

Effect of Mechanical Strain on the Optical Properties of Nodal‐Line Semimetal ZrSiS

In situ nanomechanical measurement of Cu nanowires

Strain-related optical properties of ZnO crystals due to nanoindentation on various surface orientations

Mechanical Properties of Sol–gel Derived Lead Zirconate Titanate Thin Films by Nanoindentation

Extrinsic size dependent plastic deformability of ZnS micropillars

Photoinduced Stiffening In Zno Nanobelts

Structural stability and compressibility study for ZnO nanobelts under high pressure

Zn nanobelts: a new quasi one-dimensional metal nanostructure

Optical Properties of Rectangular Cross-sectional ZnS Nanowires

Determination of mechanical properties of pure zirconium processed by surface severe plastic deformation through nanoindentation

Straight ZnS nanobelts with wurtzite structure synthesized by the vapour phase transport process and their crystallization and photoluminescence properties

Investigation on the Machinability of Polycrystalline ZnS by Micro-Laser-Assisted Diamond Cutting

Softening Behaviors of Severely Deformed Zn Alloy Studied by the Nanoindentation