Abstract:As emerging and revolutionary alloy materials, high entropy alloys (HEAs) have been extensively studied because of their unique composition, microstructures and excellent mechanical properties and performances. However, there have been limited studies on the deformation behaviors and mechanisms of HEA single crystals at the micro/nanoscale. Here, we fabricated single-crystalline CoCrFeNi HEA pillars with typical orientations of <100>, <110> and <111> and diameters ranging from 272 nm to 1,253 nm and then conducted in situ uniaxial compression tests on these fabricated micro/nanopillars inside a scanning electron microscope. The in situ compression tests showed pronounced size effects on yield and flow stresses in the <100>-, <110>- and <111>-oriented micro/nanopillars, i.e., both yield and flow stresses follow a scaling law with pillar diameter. The scaling exponents of <110>- and <111>-oriented micro/nanopillars are approximately -0.60, which is close to those of face-centered-cubic (FCC) pure metallic micro/nanopillars. However, the <100>-oriented pillars, having a scaling exponent of -0.32∼-0.17, exhibit weaker size effects on yield and flow stresses compared with the <110>- and <111>-oriented micro/nanopillars. Combining observations and analyses using transmission electron microscopy, and large-scale atomistic simulations, we revealed that the nucleation and slip of full dislocations dominate the plastic deformation in the <110>- and <111>-oriented micro/nanopillars, while deformation twinning is a governing mechanism in the <100>-oriented micro/nanopillars. These underlying deformation mechanisms are responsible for the size effects of single-crystalline HEA micro/nanopillars. Large-scale atomistic simulations further reveal that twin nucleation in <100>-oriented pillars is initiated by the slip of pre-existing partial dislocations from an internal source. By considering the free energy change during partial slip, we used a theoretical model to predict the scaling law for the size effects of <100>-oriented micro/nanopillars. The predicted scaling exponent for the size effect of <100>-oriented micro/nanopillars is consistent with our experimental results. Our current study sheds light on the underlying deformation mechanisms in FCC HEA single crystals at the micro/nanoscale, which provides a guide for the design and fabrication of HEAs with high strength and remarkable plasticity.

Extrinsic size dependent plastic deformability of ZnS micropillars

Crystallization-aided extraordinary plastic deformation in nanolayered crystalline Cu/amorphous Cu-Zr micropillars

Low-Temperature In Situ Large Strain Plasticity Of Ceramic Sic Nanowires And Its Atomic-Scale Mechanism

Numerical Study of the Size-Dependent Deformation Morphology in Micropillar Compressions by a Dislocation-Based Crystal Plasticity Model

Study on stochastic nature of plasticity of Cu/Zr metallic glass micropillars

Understanding specimen- and grain-size effects on nanoscale plastic deformation mechanisms and mechanical properties of polycrystalline yttria-stabilized tetragonal zirconia nanopillars

Mechanical Behavior of Tetragonal Zirconia Nanopillars Subjected to Uniaxial Loading: A Molecular Dynamics Study

Effect of Mechanical Strain on the Optical Properties of Nodal‐Line Semimetal ZrSiS

Temperature effect on mechanical response of flash-sintered ZnO by in-situ compression tests

Mechanical properties and deformation mechanisms of single crystal Mg micropillars subjected to high-strain-rate C-axis compression

Strain-rate and size dependence of gradient lamellar nickel investigated by in-situ micropillar compression

Extreme dislocation-mediated plasticity of yttria-stabilized zirconia

Direct quantification of mechanical responses of TiSiN/Ag multilayer coatings through uniaxial compression of micropillars

Effects of size on the mechanical response of metallic glasses investigated through in situ TEM bending and compression experiments

Size Effects in Strength and Strain Hardening Behavior of Single-Crystal 7075 Aluminum Alloy Micropillars

Size effects and plastic deformation mechanisms in single-crystalline CoCrFeNi micro/nanopillars

Deformation mechanisms of Mg-Ca-Zn alloys studied by means of micropillar compression tests

Atomistic investigation of pseudoelasticity in zirconia nanopillars

Effect of Strain Rate and Extrinsic SIZE Effect on Micro-Mechanical Properties of Zr-Based Bulk Metallic Glass

High strain rate in situ micropillar compression of a Zr-based metallic glass

Aggravated stress fluctuation and mechanical size effects of nanoscale lamellar bone pillars