Softening Behaviors of Severely Deformed Zn Alloy Studied by the Nanoindentation

Jiangjiang Hu,Shuo Sun,Wei Zhang,Guangjian Peng,Shuang Han,Xu Sun,Yusheng Zhang,Taihua Zhang

DOI: https://doi.org/10.3390/coatings10090803

IF: 3.236

2020-08-20

Coatings

Abstract:Zamak 3 alloy treatment by sliding-friction treatment (SFT) was investigated by nanoindentation to explore the influence of microstructure and strain rate on nanoscale deformation at room temperature. The results show that obvious material softening occurs in the ultrafine-grained (UFG) Zn alloy and strain-hardening happens in the twinning-deformed layer, respectively. It can be concluded that almost constant values of V in the UFG Zn alloy contribute to the dislocations moving along the grain boundary (GB) not cross the grain interior. In the twinning-deformed layer, the highly frequent dislocation–twinning boundary (TB) interactions are responsible for subsequent inverse Cottrell–Stokes at lower stress, which is quite different from dislocation–dislocation reaction inside the grain in their coarse-grained (CG) counterpart.

materials science, multidisciplinary,physics, applied, coatings & films

What problem does this paper attempt to address?

This paper aims to investigate the nano - indentation creep behavior of Zamak 3 alloy at room temperature after sliding friction treatment (SFT), especially the influence of microstructure and strain rate on nano - scale deformation. Specifically, the main research objectives include:

1. **Provide detailed microstructure evolution information**: Study the microstructure changes of Zn alloy after sliding friction treatment (SFT).
2. **Evaluate the influence of different microstructures on hardness and nano - indentation creep behavior**: Analyze the hardness and creep behavior in different regions (ultra - fine - grained region, twinned region and coarse - grained region) through experimental data.
3. **Understand the softening phenomenon and its deformation mechanism**: Explore the mechanism of material softening after severe deformation, especially the deformation behavior in the ultra - fine - grained region and the twinned region.

### Main problems
The key problems that the paper attempts to solve are:
- **Why does the Zn alloy show a softening phenomenon after severe deformation?**
- **How do the microstructure and strain rate affect the nano - scale deformation behavior?**

### Research methods
To achieve the above goals, the following methods are adopted in the research:
- **Microstructure characterization**: Characterize the samples using an optical microscope (OM), a scanning electron microscope (SEM), a laser confocal microscope (LCM) and a transmission electron microscope (TEM).
- **Nano - indentation test**: Measure the hardness and creep behavior in different regions through nano - indentation experiments and analyze their relationship with the microstructure.

### Experimental results
- **Microstructure observation**: The samples can be divided into three different regions: the top region, the middle region and the matrix. The top and middle regions have experienced severe deformation, and the grain size has been significantly refined. Many layered structures, which may be twinned structures, also appear in the middle region.
- **Hardness evolution**: The hardness of most regions of the Zn alloy after SFT treatment increases, but a softening phenomenon occurs on the deformed surface.
- **Nano - indentation creep behavior**: Under different strain rates, the creep behaviors in the ultra - fine - grained region, the twinned region and the coarse - grained region show obvious differences. The creep stress index (n) in the ultra - fine - grained region is smaller, while that in the coarse - grained region is larger.

### Discussion
- **Explanation of the softening phenomenon**: The paper proposes that the softening phenomenon in the ultra - fine - grained region may be related to the movement of dislocations on the grain boundaries rather than through the interior of the grains. In the twinned region, the frequent dislocation - twin - interface interactions lead to the inverse Cottrell - Stokes effect, which is a mechanism different from the dislocation - dislocation reaction in the coarse - grained region.
- **Superplastic behavior**: Although the grain size in the ultra - fine - grained region is much larger than the nano - scale, its softening phenomenon may be related to superplastic behavior, which requires further research to verify.

In conclusion, through detailed experiments and analysis, this paper reveals the softening phenomenon of Zn alloy after severe deformation and the underlying microscopic mechanisms, providing an important reference for further understanding the deformation behavior of such materials.