Abstract:Effects of film thickness and electrolyte concentration on the photovoltaic performance of TiO2-based dye-sensitized solar cell (DSSC) were studied. Nanocrystalline anatase TiO2 thin films with varying thicknesses (3.2–18.9μm) have been deposited on FTO/glass substrates by screen printing method as work electrodes for DSSC. The prepared samples were characterized by UV-Vis spectroscopy, Atomic Force Microscopy/Scanning Tunneling Microscopy (AFM/STM) and X-ray diffraction (XRD). The optimal thickness of the TiO2 photoanode is 13.5μm. Short-circuit photocurrent density (Jsc) increases with film thickness due to enlargement of surface area whereas open-circuit voltage decreases with increase in thickness due to increase in electron diffusion length to the electrode. However, the Jsc and Voc of DSSC with a film thickness of 18.9μm (7.5mA/cm2 and 0.687V) are smaller than those of DSSC with a TiO2 film thickness of 13.5μm (9.9mA/cm2 and 0.734V). This is because the increased thickness of TiO2 thin film resulted in the decrease in the transmittance of TiO2 thin films hence reducing the incident light intensity on the N719 dye. Photovoltaic performance also depends greatly on the redox couple concentration in iodide∖triiodide. Jsc decreases as the redox concentration increases as a result of increased viscosity of the solution which lowers ion mobility. Similarly, Voc decreases as the electrolyte concentration increases due to enhanced back electron transfer reaction. An optimum power conversion efficiency of 4.3% was obtained in a DSSC with the TiO2 film thickness of 13.5μm and redox concentration of 0.03mol dm−3 under AM 1.5G illumination at 100mW/cm2.

Influence of Resistance of TiO2 Mesoporous Films on Photoelectric Properties of Dye-Sensitized Solar Cells

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Influence of Nanoporous TiO_2 Films on the Performance of Dye-Sensitized Solar Cells

Effects of Thickness of TiO2 Graded Film on the Photovoltaic Performance for Flexible Dye Sensitized Solar Cells

Effects of Thickness of TiO_2 Graded Film on the Photovoltaic Performance for Flexible Dye-Sensitized Solar Cells

Thickness-dependent electron transport performance of mesoporous TiO2 thin film for dye-sensitized solar cells

The Effect of Optical Properties on Photovoltaic Performance in Dye-Sensitized Tio2 Nanocrystalline Solar Cells

A Numerical Simulation and Impedance Study of the Electron Transport and Recombination in Binder-Free TiO2 Film for Flexible Dye-Sensitized Solar Cells

Effect of Annealing Temperature on the Photoelectrochemical Properties of Dye-Sensitized Solar Cells Made with Mesoporous TiO2 Nanoparticles

Avoiding Diffusion Limitations in Cobalt(iii/ii)-Tris(2,2'-bipyridine)-based Dye-Sensitized Solar Cells by Tuning the Mesoporous TiO2 Film Properties.

EFFECTS OF TiO2 FILM THICKNESS AND ELECTROLYTE CONCENTRATION ON PHOTOVOLTAIC PERFORMANCE OF DYE-SENSITIZED SOLAR CELL

Influence of TiO2 Film Thickness on the Electrochemical Behaviour of Dye-Sensitized Solar Cells

Metal-Oxide Based Solar Cells

Impacts of ZnO/TiO<sub>2</sub> Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

Effect of the Addition of Ti3+ into TiO2 Film on the Performance of Dye Sensitized Solar Cells

TiO2 surface modification and characterization with nanosized PbS in dye-sensitized solar cells.

The Influence of Electrophoretic Deposition for Fabricating Dye-Sensitized Solar Cell

Preparation of Mesoporous Titanium Dioxide Anode by A Film- and Pore-Forming Agent for the Dye-Sensitized Solar Cell

Impacts of ZnO/TiO 2 Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

Zinc-doping in TiO 2 films to enhance photovoltaic performance of Dye-sensitized solar cells

Effect of TiOx Compact Layer with Varied Components on the Performance of Dye-Sensitized Solar Cells