Abstract:Well-aligned TiO2 nanowire arrays are fabricated through a simple hydrothermal method and sensitized with electrodeposited CdSe nanoparticles. Annealing treatments at various temperatures (350 °C, 380 °C, 400 °C and 450 °C) are used to improve the performance of the as-deposited photoelectrode and the effects of various annealing atmospheres (air, O2, N2, Ar and vacuum) are further investigated. Although the film is only 2μm thick, a significant photocurrent density of 8.83 mA cm−2 is observed under 100 mW cm−2 illumination (AM 1.5 G) for the sample annealed at 400 °C in air, which is 5.69 times higher than that of the as-deposited sample and much better compared with that of the samples annealed in other environments. Careful investigation on the annealing effect is performed with a range of analytical techniques, such as SEM, TEM, HRTEM, EDX, UV-vis absorption spectra, and XRD. In particular, HRTEM observation affords a further insight into the exact change in CdSe crystalline structure annealed at different temperature. The results indicate that the crystal structure of CdSe nanoparticles and the interface between TiO2 and CdSe are improved with appropriate annealing below 400 °C, leading to an enhancement of performance. On the other hand, over-annealing at 450 °C results in severe migration and oxidation of CdSe, and leads to a poor photoelectric performance. A better understanding of the influence of the annealing environment is obtained through the adoption of different annealing atmospheres at 400 °C. It is found that both O2 and N2 have a more positive effect on the annealing process compared with Ar and vacuum, while air is found to be the favorite environment for annealing treatment.

Effect of Annealing Temperature on the Photoelectrochemical Properties of Dye-Sensitized Solar Cells Made with Mesoporous TiO2 Nanoparticles

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Impact of annealing on spiro‐OMeTAD and corresponding solid‐state dye sensitized solar cells

Enhanced Performance of Dye-Sensitized Solar Cells based on TiO2 Nanotube Membranes using Optimized Annealing Profile

High-Temperature Annealing of TiO2 Nanotube Membranes for Efficient Dye-Sensitized Solar Cells

Influence of Nanoporous TiO_2 Films on the Performance of Dye-Sensitized Solar Cells

Thickness-dependent electron transport performance of mesoporous TiO2 thin film for dye-sensitized solar cells

Effect of Annealing Temperature on Structural Phase Transformations and Band Gap Reduction for Photocatalytic Activity of Mesopores TiO2 Nanocatalysts

The Effect of Optical Properties on Photovoltaic Performance in Dye-Sensitized Tio2 Nanocrystalline Solar Cells

Effect of Sensitizer Adsorption Temperature on the Performance of Dye-Sensitized Solar Cells

Study on Sol-hydrothermal Synthesis of TiO_2 Nanoparticles and Their Photoelectric Properties Sensitized by Dye

Study on Sol-hydrothermal Synthesis of TiO<SUB>2</SUB> Nanoparticles and their Photoelectric Properties Sensitized by Dye: Study on Sol-hydrothermal Synthesis of TiO<SUB>2</SUB> Nanoparticles and their Photoelectric Properties Sensitized by Dye

Effect of Photoanode Process Sequence on Efficiency of Dye-Sensitized Solar Cells

Hybrid Cdse/Tio2 Nanowire Photoelectrodes: Fabrication and Photoelectric Performance

Improving of the Photovoltaic Characteristics of Dye-Sensitized Solar Cells Using a Photoelectrode with Electrospun Porous TiO2 Nanofibers

Enhanced performance of dye-sensitized solar cell via surface modification of mesoporous TiO2 photoanode with electrodeposited thin TiO2 layer

Improvement of performance of dye-sensitized solar cell by using composite nanoparticulate photoelectrode films

The Effect of Drying and Thickness of TiO2 Electrodes on the Photovoltaic Performance of Dye-Sensitized Solar Cells

Nanocrystalline titanium dioxide prepared by hydrothermal method and its application in dye-sensitised solar cells

Open-circuit voltage improvement by using TiO2 nanotubes as a working electrode of dye-sensitized solar cell