Abstract:There is a great developing potential by using sequential color method to achieve color display.It has many good performances of low cost,high resolution and color effect.This paper introduces the field sequential color video controller for LCoS produced by Nankai University.Field sequential color(FSC) is used in this system to achieve the color display.And by using experiment and debug,the color display of the LCoS chip is realized.In this system,the video data are output in parallel,which reduces the work frequency of the whole controller system.The system makes use of two group of outer SRAM to buffer the frame data,and uses ping-pong operation of the SRAM to achieve the video display in series.The core of the controller is realized by a piece of FPGA.This paper discusses the method to achieve the data flow processing in the FPGA in detail: The FPGA adopts three shift registers,and the data are buffered in dynamic.The shift registers complete the serial-in-parallel-out data transform,which transform the RGB signal data into the RGB field signal data separately;By using the inner RAM of the FPGA,the interpolation operation of the image is achieved,which satisfies the requirement of the LCoS display.At last,some problems in the LCoS color display by FSC is introduced.

Design of reference voltage source integrated in LCoS chip

Novel design of reference voltage source integrated in LCoS chip

Programme Design of Reference Voltage Source Module Embedded in LCOS Chip

Design and Implementation of LCoS Display Driver System Based on FPGA

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

Design and Realization of a High Precision Low Temperature Coefficient Bandgap Voltage Reference

A 14-Bit Column-Parallel Two-Step SA ADC with On-Chip Scaled Reference Voltages Self-Calibration for CMOS Image Sensor

Bandgap Voltage Reference Design with Enhanced Tolerance of Process Variations

Liquid crystal cell design of VGA field sequential color LCoS display

A Low-Power Voltage Reference Source for Lithium Battery Protection ICs

A New Digital to Analog Converter Based on Low-Offset Bandgap Reference.

Circuit Design of Single Panel Color LCOS Microdisplay Chip

Design and Realization of Band-gap Reference in LCD

Video Controller System by Using Field Sequential Color

Design of LCD Driver Chip with 1024-Level Gray Scale and Large Capacitor Load

The LCoS Rear Projection Technology and Development in China

Research and Design of Data Processor for Helmet LcoS Microdisplay System

Design of a High PSRR Low-pressure Bandgap Reference Source with Curvature Compensation

A 30na Temperature-Independent CMOS Current Reference and Its Application in an LDO

Design of a Power Efficient Self-Adaptive LVDS Driver.

A Compact Low-Voltage Segmented D/A Converter with Adjustable Gamma Coefficient for AMOLED Displays