Abstract:Buildings with split air-conditioners (referred to as SAC buildings) are not equipped with mechanical ventilation systems. The fresh air supply in these buildings primarily relies on natural ventilation and air infiltration, both of which can introduce outdoor particulate matter (PM) pollutants into the indoor environment. To simultaneously satisfy fresh air and indoor PM concentration requirements, two indoor air purification strategies can be employed, including air purifiers (APs) combined with open-window ventilation (AP-Mode) and fresh air units (FAUs) combined with positive pressure control (FAU-Mode). Accordingly, an investigation is required in order to determine which of the two strategies is more suitable for various types of SAC buildings. In this study, firstly, a new method for calculating the mechanical fresh air supply rate needed to maintain a positive room pressure is proposed for SAC buildings. It is concluded that positive room pressure can be maintained if the mechanical fresh air supply rate is more than 3.2 times the natural air infiltration rate (i.e., air infiltration rate when a room is not supplied with mechanical fresh air). Then, based on the mass balance principle of indoor particulate matter, the clean air delivery rates (CADRs) are calculated for APs used in the AP-Mode and FAUs used in the FAU-Mode under different PM2.5 I/O ratios and fresh air supply rates, and the annual energy consumptions of the two strategies are compared. Consequently, it is determined that in most cases, the FAU-Mode has a lower annual energy consumption when used in SAC buildings in Beijing, Shanghai, and Guangzhou. Finally, considering the room airtightness requirement for positive pressure control and the indoor PM2.5 concentration upper limit of 35 mu g/m(3), the AP-Mode should be used in rooms with fresh air requirements lower than 1 h(-1), whereas the FAU-Mode should be used in other cases.

Design method of combined air cleaners in urban underground spaces

Characteristics and eliminating strategies of contaminants in urban underground spaces

Identifying urban ventilation corridors through quantitative analysis of ventilation potential and wind characteristics

Analysis of a novel pressurized dehumidification air conditioning system for urban underground space

Satellite-Based Optimization and Planning of Urban Ventilation Corridors for a Healthy Microclimate Environment

Numerical simulation on installation location of combined air cleaners in underground stores

Sustainable design for underground environments in modern cities

Purifier or Fresh Air Unit? A Study on Indoor Particulate Matter Purification Strategies for Buildings with Split Air-Conditioners

Integrated design for underground space environment control of subway stations with atriums using piston ventilation

Cleaning energy efficiency evaluation index of household outdoor air ventilators

Spatial planning for urban ventilation corridors by urban climatology

Stratum Ventilation: Enabling Simultaneous Energy Conservation and Air Purification in Subway Cars

Optimization of Bathroom Ventilation Design for an Iso Class 5 Clean Ward

Working in Underground Spaces: Architectural Parameters, Perceptions and Thermal Comfort Measurements

A data-informed assessment method for the urban underground complex vitality

Modeling Airflow Dynamics and Their Effects on PM2.5 Concentrations in Urban Ventilation Corridors of Hangzhou

Performance Analysis and Improvement of Air Filtration and Ventilation Process in Semiconductor Clean Air-Conditioning System

Algorithm for Quickly Calculating the Pollutant Distribution in Central Ventilation Systems

A two-level optimisation approach for underground natural ventilation based on CFD and building energy simulations

A review of air filtration technologies for sustainable and healthy building ventilation

Indoor air quality and energy-saving potential improvement of a range-hood-integrated air cleaner