Abstract:The mechanical analysis of thin-plate structures is a major challenge in the field of structural engineering, especially when they have nonclassical boundary conditions, such as those encountered in cement concrete road slabs connected by transfer bars. Conventional analytical solutions are usually limited to classical boundary conditions—clamped support, simple support, and free edges—and cannot adequately describe many engineering scenarios. In this study, an analytical solution to the bending problem of an anisotropic thin plate subjected to a pair of edges with free opposing elastic rotational constraints is found using a two-dimensional augmented Fourier series solution method. In the derivation process, the thin-plate problem can be transformed into a problem of solving a system of linear algebraic equations by applying Stoke's transform method, which greatly reduces the mathematical difficulty of solving the problem. Complex boundary conditions can be optimally handled without the need for large computational resources. The paper addresses the exact analytical solutions for bending problems with multiple combinations of boundary conditions, such as contralateral free–contralateral simple support (SFSF), contralateral free–contralateral solid support–simple support (CFSF), and contralateral free–contralateral clamped support (CFCF). These solutions are realized by employing the Stoke transformation and adjusting the spring parameters in the analyzed solutions. The results of this method are also compared with the finite element method and analytical solutions from the literature, and good agreement is obtained, demonstrating the effectiveness of the method. The significance of the study findings lies in the simplification of complex nonclassical boundary condition problems using a simple and reliable analytical method applicable to a wide range of engineering thin-plate structures.

Buckling of Simply Supported Rectangular Reissner–Mindlin Plates Subjected to Linearly Varying In-Plane Loading

ELASTIC BUCKLING OF SIMPLY SUPPORTED RECTANGULAR PLATES UNDER BENDING,SHEAR AND BEARING STRESSES

Elastic stability of plate simply supported on four sides subjected to combined bending shear and patch loading

Buckling of Symmetrical Cross-Ply Composite Rectangular Plates under a Linearly Varying In-Plane Load

Elastic Buckling of Web Restrained by Flanges in I-section Members

Buckling of Simply Supported Thin Plate with Variable Thickness under Bi-Axial Compression Using Perturbation Technique

LOCAL BUCKLING OF I-SECTIONS IN COMPRESSION AND BENDING

Three-dimensional Elasticity Solutions for Bending of Generally Supported Thick Functionally Graded Plates

On the Solution to Pre- Buckling of a Thin Rectangular Plate Subjected to a Thick Strip in-plane Loading

Nonlinear Postbuckling Behavior of a Simply Supported, Uniformly Compressed Rectangular Plate

A note on bending of simply-supported isosceles right triangular plates

Analytic Solution for Buckling Problem of Rectangular Thin Plates Supported by Four Corners with Four Edges Free Based on the Symplectic Superposition Method

Elastic Buckling Analysis of Rectangular Longitudinally Profiled (LP) Steel Plates under Uniform Compression

Buckling behaviour of rectangular and skew plates with elastically restrained edges under non-uniform mechanical edge loading

Buckling of Rectangular Plates With General Variation in Thickness

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Buckling Analysis of Rectangular Plates with Variable Thickness Resting on Elastic Foundation

An analytical spectral stiffness method for buckling of rectangular plates on Winkler foundation subject to general boundary conditions

An Analytical Solution for the Bending of Anisotropic Rectangular Thin Plates with Elastic Rotation Supports

Buckling loads of variable thickness thin isotropic plates