Abstract:Planar steel plates have many advantages, including high precision, flexible outline shape fabrication, and convenient transportation and storage, which make them suitable for various steel structures (e.g., reticulated shell structures). However, the steel plates are not commonly used as structural members, because they have a relatively low out-of-plane flexural stiffness. To improve the flexural buckling resistance, a novel type of built-up plate member comprising two longitudinal plates is proposed in this study. Additionally, the flexural buckling behavior of the novel built-up members is investigated. A series of compression tests on 42 specimens of built-up plate members is conducted to determine the elastic and ultimate critical loads. Flexural buckling about the minor axis is observed to be the failure mode of the specimens. The equivalent slenderness ratio method is used to determine the theoretical elastic critical loads of the specimens. With consideration of the measured material properties, geometric imperfections, and residual stresses of the specimens, a refined finite-element model is developed to simulate the flexural buckling behavior. Furthermore, the applicability of two representative specifications (American and European) to the novel built-up member is discussed. The results indicate that the design strengths calculated using these specifications are generally conservative for determining the ultimate loads of the built-up plate members. Design curve “c” in Eurocode 3 is found to be the most suitable among the specifications of interest for determining the design strength. This study provides valuable guidance for the design of built-up plate members.

Buckling behaviour of rectangular and skew plates with elastically restrained edges under non-uniform mechanical edge loading

ELASTIC BUCKLING OF SIMPLY SUPPORTED RECTANGULAR PLATES UNDER BENDING,SHEAR AND BEARING STRESSES

Elastic Buckling of Web Restrained by Flanges in I-section Members

Elastic stability of plate simply supported on four sides subjected to combined bending shear and patch loading

Elastic Buckling of Web Plates in I-girders under Patch and Wheel Loading

Elastic and Elastic-Plastic Threshold Stiffness of Stiffened Steel Plate Walls in Compression

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

In-plane Nonlinear Buckling Analysis of Circular Arches Considering Shear Deformation

Accurate mechanical buckling analysis of couple stress-based skew thick microplates

Buckling of Simply Supported Thin Plate with Variable Thickness under Bi-Axial Compression Using Perturbation Technique

Elastic Buckling Analysis of Rectangular Longitudinally Profiled (LP) Steel Plates under Uniform Compression

Buckling of Simply Supported Rectangular Reissner–Mindlin Plates Subjected to Linearly Varying In-Plane Loading

Buckling Analysis of Rectangular Plates with Variable Thickness Resting on Elastic Foundation

Post-buckling Behavior of Rectangular Multilayer FG-GPLRC Plate with Initial Geometric Defects Subjected to Non-Uniform In-Plane Compression Loads in Thermal Environment

Elastic Buckling Formulas of Multi-Stiffened Corrugated Steel Plate Shear Walls

The Elastic Buckling Coefficient of a Rectangular Longitudinally Profiled (LP) Steel Plate with All Edges Simply‐supported

GLOBAL SHEAR BUCKLING OF CORRUGATED STEEL PLATES WITH EDGES ELASTICALLY RESTRAINED AGAINST ROTATION

On Buckling of Non-Uniform Shallow Arch under a Central Concentrated Load

An analytical spectral stiffness method for buckling of rectangular plates on Winkler foundation subject to general boundary conditions

A Finite Integral Transform-Based Generalized Eigenvalue Formulation for Buckling of Orthotropic Rectangular Plates with Rotational Restraints

Differential quadrature analysis of the buckling of thin rectangular plates with cosine-distributed compressive loads on two opposite sides