Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

Establishment of Hydrogen Measurement System for Magnesium Alloy Melt

Preparation and Properties of Mg-based Hydrogen Storage Alloys for Hybrid Electric Vehicle

Hydrogen desorption properties of the MgH2-AlH3 composites

Hydrogen Absorption Properties of a Slurry System Composed of a Magnesium Alloy Powder and C6H6

Theoretical and Experimental Research of Hydrogen Solid Solution in Mg and Mg-Al System

Development of a System for Fast Measuring Hydrogen Content in Aluminum Alloy Melt Based on Dynamic Measurement of Hydrogen Partial Pressure

An Investigation on the Reaction Mechanism of LiAlH4–MgH2 Hydrogen Storage System

Thermodynamic Destabilization Of Magnesium Hydride Using Mg-Based Solid Solution Alloys

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals

The hydrogen storage behavior of Mg3La and Mg3LaNi0.1

Effects of the Amount of Mg Impurity on the Electrochemical Properties of Ml(NiCoMnTi)5 Hydrogen Storage Alloy

Hydrogen Storage Behaviors and Microstructure of MF3 (m=ti, Fe)-doped Magnesium Hydride

Kinetics of absorbing hydrogen of Al melt

Tunable Hydrogen Storage in Magnesium - Transition Metal Compounds

Enhanced Hydrogen Generation Behaviors and Hydrolysis Thermodynamics of As-Cast Mg–Ni–Ce Magnesium-Rich Alloys in Simulate Seawater

Electrochemical Sensing of Dissolved Hydrogen in Aqueous Solutions as a Tool to Monitor Magnesium Alloy Corrosion

Experimental Study on the Effect of Low Melting Point Metal Additives on Hydrogen Production in the Aluminum–water Reaction

Hydrogen storage properties of Mg-23.3wt.%Ni eutectic alloy prepared via hydriding combustion synthesis followed by mechanical milling

Hydrogen generation behaviors from hydrolysis of cold-welding free magnesium-calcium hydride-expanded graphite composites

Hydrolysis of Mg-based Alloys and Their Hydrides for Efficient Hydrogen Generation

High Active Hydrogen Storage Alloy Mg<sub>2</sub>NiH<sub>4</sub> and Mg<sub>2</sub>Ni Synthesized at Temperatures Lower than 733 K