Hydration kinetics and mechanism of C 3 S with cellulose nanocrystals
Aofei Guo,Danying Gao,Zhihui Sun,Hu Feng,Zhenyun Yu,Zeyu Guo,Hong Shang,Fengjuan Liu
DOI: https://doi.org/10.1016/j.cemconcomp.2024.105447
IF: 9.93
2024-01-25
Cement and Concrete Composites
Abstract:Tricalcium silicate (C 3 S) is the primary ingredient in ordinary Portland cement (OPC). Understanding the hydration kinetics of C 3 S with cellulose nanocrystals (CNC) is the key to unveiling the intrinsic mechanism of CNC affecting OPC hydration. This study investigates the hydration interactions between C 3 S and CNC through extensive testing. Findings indicate that CNC incorporation can initially slow the hydration reaction and postpone the early-stage hydration of C 3 S. However, past the initial period (3 days in this study), CNC presence enhances the hydration pace and aids the hydration process, leading to an increase in the formation of calcium silicate hydrate (C–S–H) and calcium hydroxide (CH) without creating new phases. Further, the presence of CNC promotes the homogenous hydration of C 3 S, ensuring a homogenous distribution of hydration products. It also reduces the Ca/Si ratio in the C–S–H, without altering the C–S–H morphology. A correlation is made between heat flow and the thickness of hydration products enveloping C 3 S particles, confirming that CNC can intensify the inward water diffusion rate through C 3 S particles for the same hydration product thickness. Critically, it is found that the effect of CNC on C 3 S hydration is dependent on the water/C 3 S ratio. A low or moderate water/C 3 S ratio can promote C 3 S hydration but a very high water/C 3 S ratio diminishes the beneficial effects of CNC on C 3 S hydration. Finally, the study proposes a mechanism of CNC's influence over the hydration of C 3 S with varying water/C 3 S ratios.
construction & building technology,materials science, composites