Abstract:During the early hydration of ordinary Portland cement (OPC), tricalcium aluminate (C3A) exhibits the highest reactivity among the clinker phases. Consequently, C3A significantly influences the early rheological properties of OPC-based materials, thereby linking rheology with C3A reactivity. The reactivity of C3A is affected by temperature, calcium sulfates, admixtures, and ionic strength. Calcium sulfate phases such as gypsum, bassanite, or anhydrite are used in technical Portland cement to control the early reactivity of C3A. This work investigates the impact of three sodium salts - sodium chloride (NaCl), sodium nitrate (NaNO3), and sodium sulfate (Na2SO4) - on the hydration of C3A. We study model suspensions composed of 10% cubic C3A and 90% quartz by weight with in-situ isothermal calorimetry. The C3A suspensions were mixed inside the calorimeter with a water-to-solid ratio of 0.8. Increasing concentrations, i.e., 400, 1000, and 2000 micromol per g, of the sodium salts mentioned above lead to characteristically decreased C3A reactivities. Combined with small amplitude oscillatory shear (SAOS) rheology experiments, we show that the addition of Na2SO4 significantly reduces the heat flow and the initial storage modulus. In contrast, NaNO3 and NaCl had less pronounced effects on both storage modulus and reaction heat. The differences in structure development are attributed to the formation of different hydrate phases. Specifically, Na2SO4 leads to ettringite formation, whereas the presence of nitrate and chloride ions favors the precipitation of AFm phases. The study concludes that introducing various sodium salts can modulate the kinetics of C3A hydration and alter the reaction pathway, forming different hydrate phases.

New insights into the reaction of tricalcium silicate (C3S) with solutions to the end of the induction period

Modelling the dissolution and precipitation process of the early hydration of C3S

Dissolution and early hydration of tricalcium aluminate in aqueous sulfate solutions

Molecular quantification of the decelerated dissolution of tri-calcium silicate (C<sub>3</sub>S) due to surface adsorption

Study on the hydration products of C3S prepared by sol–gel method

Molecular dynamics study on the Tri-calcium silicate hydration in sodium sulfate solution: Interface structure, dynamics and dissolution mechanism

New insights into the non-classical nucleation of C-S-H

Understanding silicate hydration from quantitative analyses of hydrating tricalcium silicates

Ab initio mechanism revealing for tricalcium silicate dissolution

In Situ Soft X-ray Spectromicroscopy of Early Tricalcium Silicate Hydration

Effect of Silica Crystalline State on Hydration Products of Tricalcium Silicate at High Temperatures

Hydration kinetics and mechanism of C 3 S with cellulose nanocrystals

A kinetic Monte Carlo study of the C 3 S dissolution mechanism

On the global hydration kinetics of tricalcium silicate cement

Hydration Characteristics of Tricalcium Aluminate in the Presence of Nano-Silica

Simulation Analysis of Microstructure Development of Tricalcium Silicate Using the Needle Model of Calcium Silicate Hydrate

Nanoscale determination of calcium silicate hydrate (C-S-H) precursors crystallized at extreme early stage

Molecular insight into the initial hydration of tricalcium aluminate

Impact of gluconate and hexitol additives on the precipitation mechanism and kinetics of C-S-H

Early Hydration and Viscoelastic Properties of Tricalcium Aluminate Pastes Influenced by Soluble Sodium Salts

Impact of varying Li2CO3 additions on the hydration of ternary CSA-OPC-anhydrite mixes