Abstract:In this work, a convenient surface-initiated free radical graft-polymerization method, by which polymethacrylic acid (PMAA) with a high grafting density was grafted on silica gel particles, was put forward, and it was feasible and effective. The coupling agent γ-aminopropyltrimethoxysilane (AMPS) was first bound onto the surfaces of silica gel particles, obtaining the modified particles AMPS-SiO2. So a redox initiation system was constituted with the amino groups on the surfaces of AMPS-SiO2 particles and ammonium persulphate in the solution. A great deal of primary free radicals on the surfaces of AMPS-SiO2 particles is produced via the redox initiating reaction, so that the surface-initiated free radical graft- polymerization of methacrylic acid (MAA) on the silica gel particles was realized, giving the grafted particles PMAA/SiO2 with a high grafting degree (about 30 g/100 g) of PMAA. The effects of the main factors on the surface initiated graft polymerization were examined and the corresponding mechanism was investigated in depth. The experimental results show that for this surface-initiated free radical graft-polymerization of MAA, the suitable temperature is 40 °C. If the temperature is over 40 °C, the graft polymerization will be affected negatively, and the grafting degree of PMAA will decline because of the intense heat decomposition of ammonium persulphate. During the graft polymerization, the grafted polymer layer that has formed is a hindrance to the subsequent graft polymerization. The used amount of initiator and the monomer concentration affect the graft polymerization greatly. The appropriate reaction conditions are as follows: reaction time of 10 h, initiator persulphate amount of 1.1% (it implies the mass percent of the monomer), and monomer MAA concentration of about 5% (it drives at the mass percent of the solution).

Co-grafting of acrylamide and vinyl imidazole onto EB pre-irradiated silanized silica gel

Radiation Synthesis And Characterization Of 3-(Trimethoxysilyl) Propyl Methacrylate Silanized Silica-Graft-Vinyl Imidazole For Hg(Ii) Adsorption

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Adsorption of Cr(VI) using silica-based adsorbent prepared by radiation-induced grafting.

Surface modification of PVDF porous membranes by electron irradiation

Removal of Hazardous Metal Ions from Wastewater by Radiation Synthesized Silica-Graft-dimethylaminoethyl Methacrylate Adsorbent

ANCHORING OF AZO INITIATOR AND GRAFTING OF POLY(METHYL METHACRYLATE) ONTO NANAOMETER SILICA

Preparation of acrylate polymer/silica nanocomposite particles with high silica encapsulation efficiency via miniemulsion polymerization

Selective Adsorption of Hg(II) by Γ-Radiation Synthesized Silica-Graft-vinyl Imidazole Adsorbent

Anchoring of polyacrylate onto silica and formation of polyacrylate/silica nanocomposite particles via in situ emulsion polymerization

Electrostatic Absorption of Initiator Onto Nanometer SiO2 Particles and In-Situ Emulsion Polymerization of Methyl Methacrylate in the Presence of Modified Nanometer SiO2

Preparation of Acrylonitrile Polymer/Nanometer Silica Composite Particles by In-Situ Emulsion Polymerization

Efficient removal of Cu(II), Pb(II), Cr(VI) and As(V) from aqueous solution using an aminated resin prepared by surface-initiated atom transfer radical polymerization

Fabrication of amino-functionalized silica hollow nanofibers for removal of heavy metal ions

Preparation of Grafted SiO_2-g-PMAA Particles with High Grafting Degree via a Surface-initiated Graft Polymerization Method

High density silanization of nano-silica particles using γ-aminopropyltriethoxysilane (APTES)

Amination of silica nanoparticles using aminobutanol to increase surface reactivity

Radiation Synthesis and Cr(VI) Removal of Cellulose Microsphere Adsorbent

Synthesis of polyacrylamide/modified silica composite hydrogels for synergistic complexation of heavy metal ions

Preparation of high PMMA grafted particle SiO2 using surface initiated free radical polymerization

Adsorption of Cr(VI) using cellulose microsphere-based adsorbent prepared by radiation-induced grafting