Abstract:In this work, a convenient surface-initiated free radical graft-polymerization method, by which polymethacrylic acid (PMAA) with a high grafting density was grafted on silica gel particles, was put forward, and it was feasible and effective. The coupling agent γ-aminopropyltrimethoxysilane (AMPS) was first bound onto the surfaces of silica gel particles, obtaining the modified particles AMPS-SiO2. So a redox initiation system was constituted with the amino groups on the surfaces of AMPS-SiO2 particles and ammonium persulphate in the solution. A great deal of primary free radicals on the surfaces of AMPS-SiO2 particles is produced via the redox initiating reaction, so that the surface-initiated free radical graft- polymerization of methacrylic acid (MAA) on the silica gel particles was realized, giving the grafted particles PMAA/SiO2 with a high grafting degree (about 30 g/100 g) of PMAA. The effects of the main factors on the surface initiated graft polymerization were examined and the corresponding mechanism was investigated in depth. The experimental results show that for this surface-initiated free radical graft-polymerization of MAA, the suitable temperature is 40 °C. If the temperature is over 40 °C, the graft polymerization will be affected negatively, and the grafting degree of PMAA will decline because of the intense heat decomposition of ammonium persulphate. During the graft polymerization, the grafted polymer layer that has formed is a hindrance to the subsequent graft polymerization. The used amount of initiator and the monomer concentration affect the graft polymerization greatly. The appropriate reaction conditions are as follows: reaction time of 10 h, initiator persulphate amount of 1.1% (it implies the mass percent of the monomer), and monomer MAA concentration of about 5% (it drives at the mass percent of the solution).

Preparation of Grafted SiO_2-g-PMAA Particles with High Grafting Degree via a Surface-initiated Graft Polymerization Method

Preparation of Grafted SiO2-g-PMAA Particles with High Grafting Degree Via a Surface-initiated Graft Polymerization Method

Preparation of high PMMA grafted particle SiO2 using surface initiated free radical polymerization

Controlled Grafting of Well-Defined Epoxide Polymers on Hydrogen-Terminated Silicon Substrates by Surface-Initiated Atrp at Ambient Temperature

Preparation of PGMA/SiO_2 Particulate and Its Functionalization Transform

Controlled Grafting of Well-Defined Polymers on Hydrogen-Terminated Silicon Substrates by Surface-Initiated Atom Transfer Radical Polymerization

Raft Grafting Polymerization of Mma/St from Surface of Silicon Wafer

ANCHORING OF AZO INITIATOR AND GRAFTING OF POLY(METHYL METHACRYLATE) ONTO NANAOMETER SILICA

Functionalization of Hydrogen-Terminated Silicon Via Surface-Initiated Atom-Transfer Radical Polymerization and Derivatization of the Polymer Brushes

Preparation And Characterizations Of Poly(Amic Acid) Grafted Silica Nanoparticles

Grafting of Hyperbranched Aromatic Polyamide Onto Silica Nanoparticles

Controlled Grafting of Well-Defined PGMA at Silica Nanoparticles Surface by Surface-Initiated Aqueous ATRP at Ambient Temperature

Encapsulation of silica nanoparticles by redox-initiated graft polymerization from the surface of silica nanoparticles.

Preparation of acrylate polymer/silica nanocomposite particles with high silica encapsulation efficiency via miniemulsion polymerization

Preparation of Poly(methyl Methacrylate)/ultrafine CaCO3 Composite Particles by In-Situ Dispersion Polymerization

Controlled Grafting Modification of Silica Gel Via RAFT Polymerization under Ultrasonic Irradiation

Surface Grafting Polymerization Via Cavitation Regulated Sonochemistry

In-Situ Heterogenous Polymerization of Methyl Methacrylateonto Nanometer Calcium Carbonate Particles

Pushing the Limit: Synthesis of SiO2-g-PMMA/PS Particle Brushes Via ATRP with Very Low Concentration of Functionalized SiO2-Br Nanoparticles

Electrostatic Absorption of Initiator Onto Nanometer SiO2 Particles and In-Situ Emulsion Polymerization of Methyl Methacrylate in the Presence of Modified Nanometer SiO2

Surface grafting onto SiC nanoparticles with glycidyl methacrylate in emulsion