Abstract:High-resolution and multichannel time-to-digital converters (TDCs) are needed in many electrical application systems. A new multistep fine time measurement method is proposed in this work, which is based on the delay-adjustable looped carry chains to obtain both high resolution and measurement precision. Each sub-step of the fine time measurement is assigned with a different measurement resolution in the descending order by dynamically configuring the delay line length. The time residue to be measured in the following sub-step becomes smaller, so that a finer resolution can be chosen. The overall oscillation number is the summation of the oscillation number of each sub-steps. The resolution of the TDC is determined by the last sub-step. So both high-resolution and small oscillation number (corresponding to high measurement precision) can be obtained. The TDC circuit was implemented on Stratix III field programmable gate array (FPGA) chip. Test results showed that the obtained resolution was less than 10 ps, and the measurement precision root mean square (rms) was about 13 ps. The differential nonlinearity (DNL) error and the integral nonlinearity (INL) error were in the range of −1 least significant bit (LSB) to 1 LSB without any bin calibration. The resource cost per TDC channel includes the lookup table (LUT) cost of 1064 and register cost of 318. The obtained TDC is comprehensively good considering its low resource cost and high linearity, and it is promising for multichannel TDC design.

A Fine-tuning Control Circuit Design for High-speed Digital Signal Delay

On-chip delay line based on selection network

Design and Implementation of High -Precision and Low- Jitter Programmable Delay Circuitry

High Resolution Digital Pulse Width Modulation Design For Digital Dc-Dc Converter

Design of a high-precision time-to-digital converter in an Elitestek Ti60 field-programmable-gate-array

A Digital DLL-Based Delay Management Circuit for FPGA's IO Cell

Design on circuit of fine-tuning control for RZ/R1 pulse-width

A Design of High Resolution One-Clock-Cycle TDC Based on FPGA

A Low-Cost FPGA-Based Coarse-Fine Counting Time-to-Digital Converter With External High-Precision Reference Clock

A High-Throughput Vernier Time-to-Digital Converter on FPGAs with Improved Resolution Using a Bi-Time Interpolation Scheme

Prototype development of a three-stage, high-precision, low-jitter, wide-range digital delay generator fully utilizing on-chip resources

Two Novel Designs Of Multi-Phase Clocked Ultra-High Speed Time Counter On Fpga For Tdc Implementation

A Low Dead Time Vernier Delay Line TDC Implemented in an Actel Flash-Based FPGA

An 8-Bit 4Fs-Step Digitally Controlled Delay Element with Two Cascaded Delay Units

A Picosecond Delay Generator Optimized by Layout and Routing Based on FPGA

Two-Stage Clock-Free Time-to-Digital Converter Based on Vernier and Tapped Delay Lines in FPGA Device

Large dynamic range digital delay with sub-picosecond precision

A 16-Channel 15 Ps TDC Implemented in a 65 Nm FPGA

A Multi-Channel Digital Programable Delay Trigger System with High Accuracy and Wide Range

A High-Resolution TDC Design Based on Multistep Fine Time Measurement by Utilizing Delay-Adjustable Looped Carry Chains on FPGAs

A High-Resolution Tdc Implemented In A 90nm Process Fpga