Abstract:Purpose This study aims to further refine the model, explore the influence of cutting parameters on the machining process, and apply it to practical engineering to improve the efficiency and quality of titanium alloy machining. Design/methodology/approach This paper establishes a comprehensive thermo-mechanical fully coupled orthogonal cutting model. This paper aims to couple the modified Johnson–Cook constitutive model, damage model and contact model to construct a two-dimensional orthogonal cutting thermo-mechanical coupling model for high-speed cutting of Ti6Al4V. The model considers the evolution of microstructures such as plastic deformation, grain dislocation rearrangement, dynamic recrystallization, as well as stress softening and hardening occurring continuously in Ti6Al4V metal during high-speed cutting. Additionally, the model incorporates friction and contact between the tool and the workpiece. It can be used to predict parameters such as cutting process, cutting force, temperature distribution, stress and strain in titanium alloy machining. The study establishes the model and implements corresponding functions by writing Abaqus VUMAT and VFRICTION subroutines. Findings The use of different material constitutive models can significantly impact the prediction of the cutting process. Some models may more accurately describe the mechanical behavior of the material, thus providing more reliable prediction results, while other models may exhibit larger deviations. Compared to the Tanh model, the proposed model achieves a maximum improvement of 8.9% in the prediction of cutting force and a maximum improvement of 20.9% in the prediction of chip morphology parameters. Compared to experiments, the proposed model achieves a minimum prediction error of 2.8% for average cutting force and a minimum error of 0.57% for sawtooth parameters. This study provides a comprehensive theoretical foundation and practical guidance for orthogonal cutting of titanium alloys. The model not only helps engineers and researchers better understand various phenomena in the cutting process but also serves as an important reference for optimizing cutting processes. Originality/value The originality of this research is guaranteed, as it has not been previously published in any journal or publication. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0168/

Thermal-Mechanical Effect on Temperature/Stress Distribution when Orthogonal Cutting Bearing Steel

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Coupled Thermo-mechanical Model for Metal Orthogonal Cutting Process and Finite Element Simulation

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Effects of Tool Flank Wear on Orthogonal Cutting Process of Aluminum Alloy

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Research on 3D Numerical Simulation and Experiment of Cutting Temperature for High Speed Milling of Aerospace Aluminum Alloy

Fe Analysis of the Effects of Cutting Speed on Thermomechanical Responses of Aisi 4142 Steel in High Speed Cutting

Analyzing The Effect Of Tool Edge Radius On Cutting Temperature In Micro-Milling Process

Saw-Tooth Chip Formation Process and Mechanism in Hard Turning AISI 52100 Bearing Steel

Thermomechanical Modeling and Numerical Simulation of Orthogonal Turning of 42CrMo4 Steel: Case of Workpiece/Tool Studies

Numerical Simulation of the Al2O3/ZrO2 (Y2O3) Ceramic Cutting Tool During Cutting Process's Temperature Fields and Stress Fields

A Novel Finite Element Model for Thermally Induced Machining of Ti6Al4V

A Comparative Study of Different Chip Separation Approaches for Numerical Modeling of Orthogonal Cutting.

Simulation of Material Side Flow Using a 3D Coupled Eulerian-Lagrangian Approach and a Constitutive Model Considering the Stress State

A thermo-mechanical fully coupled model for high-speed machining of Ti6Al4V

Numerical investigations on residual stresses in orthogonal cutting of Ti-6A1-4V

Predicting The Effects Of Tool Nose Radius And Lead Angle On Hard Turning Process Using 3d Finite Element Mothod

Predicting the Effects of Tool Nose Radius and Lead Angle on Hard Turning Process Using 3D Finite Element Method

The influence of the material behaviour law parameters and thermal properties on the chip morphology: application to the orthogonal cutting of Ti6Al4V alloy

3D Coupled Thermo-Mechanical Simulation of Surface Roughness and Residual Stress in End Milling Aluminum Alloy