Abstract:Purpose This study aims to further refine the model, explore the influence of cutting parameters on the machining process, and apply it to practical engineering to improve the efficiency and quality of titanium alloy machining. Design/methodology/approach This paper establishes a comprehensive thermo-mechanical fully coupled orthogonal cutting model. This paper aims to couple the modified Johnson–Cook constitutive model, damage model and contact model to construct a two-dimensional orthogonal cutting thermo-mechanical coupling model for high-speed cutting of Ti6Al4V. The model considers the evolution of microstructures such as plastic deformation, grain dislocation rearrangement, dynamic recrystallization, as well as stress softening and hardening occurring continuously in Ti6Al4V metal during high-speed cutting. Additionally, the model incorporates friction and contact between the tool and the workpiece. It can be used to predict parameters such as cutting process, cutting force, temperature distribution, stress and strain in titanium alloy machining. The study establishes the model and implements corresponding functions by writing Abaqus VUMAT and VFRICTION subroutines. Findings The use of different material constitutive models can significantly impact the prediction of the cutting process. Some models may more accurately describe the mechanical behavior of the material, thus providing more reliable prediction results, while other models may exhibit larger deviations. Compared to the Tanh model, the proposed model achieves a maximum improvement of 8.9% in the prediction of cutting force and a maximum improvement of 20.9% in the prediction of chip morphology parameters. Compared to experiments, the proposed model achieves a minimum prediction error of 2.8% for average cutting force and a minimum error of 0.57% for sawtooth parameters. This study provides a comprehensive theoretical foundation and practical guidance for orthogonal cutting of titanium alloys. The model not only helps engineers and researchers better understand various phenomena in the cutting process but also serves as an important reference for optimizing cutting processes. Originality/value The originality of this research is guaranteed, as it has not been previously published in any journal or publication. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0168/

The influence of the material behaviour law parameters and thermal properties on the chip morphology: application to the orthogonal cutting of Ti6Al4V alloy

Influence of Tool Geometrical Parameters on High Speed Cutting of Titanium Alloy Ti6Al4V

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation

Mechanism of Saw-Tooth Chip Formation of Titanium Alloy Based on Finite Element Simulation

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

A thermo-mechanical fully coupled model for high-speed machining of Ti6Al4V

Finite element simulations of Ti6Al4V titanium alloy machining to assess material model parameters of the Johnson-Cook constitutive equation

Microstructure evolution modeling of Ti6Al4V alloy during cutting using the Particle Finite Element Method and homogeneous field distributions

A Novel Finite Element Model for Thermally Induced Machining of Ti6Al4V

Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine

Coupled Thermo-mechanical Model for Metal Orthogonal Cutting Process and Finite Element Simulation

Numerical Analysis of Serrated Chip Formation Mechanism with Johnson-Cook Parameters in Micro-Cutting of Ti6Al4V

Modelling orthogonal cutting of Ti-6Al-4 V titanium alloy using a constitutive model considering the state of stress

Study on the Orthogonal Cutting Process of Al7050T7451 with Uncoated and Coated Tools

A numerical investigation and experimental validation on chip morphology of Aluminum Alloy 6061 during orthogonal machining

The Taguchi orthogonal analysis of Ti6Al4V titanium alloy chip morphology in micro-milling