Abstract:The constitutive model and its material parameters largely determine the effectiveness and accuracy of the finite element (FE) simulation for metal cutting processes. However, even for the same workpiece material, there are multiple constitutive models with different predictive abilities that are applicable to the cutting simulation. Therefore, a method for evaluating the constitutive models based on the coupled Eulerian-Lagrangian (CEL) orthogonal cutting model incorporating the experimentally determined Coulomb friction coefficient is proposed. The evaluation method can effectively avoid the influences of chip separation criteria, damage models, and adaptive remeshing on the evaluation results with the ability to simulate material side flow. This paper evaluates Johnson-Cook (JC) and Zerilli-Armstrong (ZA) constitutive models, which are often applied in cutting simulations. Material parameters for these constitutive models are identified from the constitutive data of the primary or secondary shear zone in cutting tests. A series of FE simulations for orthogonal cutting of 42CrMo4 steel is carried out under various cutting conditions using different constitutive models. The simulated cutting forces, chip thickness, and average temperature over the tool-chip interface are compared with experimental results under the same cutting conditions. The conclusion is that no constitutive model is the most accurate for all predictions. Nevertheless, for 42CrMo4 steel, the ZA model with material parameters identified from constitutive data of the secondary shear zone has the best comprehensive predictive performance. The evaluation method contributes to selecting the most suitable constitutive model and conducting efficient cutting simulations. Furthermore, several feasible approaches for improving the constitutive models are presented through error analysis.

A Comparative Study of Different Chip Separation Approaches for Numerical Modeling of Orthogonal Cutting.

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Finite Element Simulation of High-Speed Cutting

Coupled Thermo-mechanical Model for Metal Orthogonal Cutting Process and Finite Element Simulation

An experimental and finite element investigation of chip separation criteria in metal cutting process

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Simulation of Chip Formation in High-Speed Hard Machining

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Finite Element Simulation of the Orthogonal Metal Cutting Process

Numerical study of smoothed particle Galerkin method in orthogonal cutting simulations

3-D Finite Element Simulation of Chip Formation in Ultraprecision Cutting Process

Finite Element Modeling Method Of Chip Formation Based On Ale Approach

3-D Numerical Simulation on the Chip Machining Process of a Metal Block

Thermal-Mechanical Effect on Temperature/Stress Distribution when Orthogonal Cutting Bearing Steel

A Comparative Study on Modeling Approaches Towards Laser-Assisted Machining

Evaluation of constitutive models used in orthogonal cutting simulation based on coupled Eulerian–Lagrangian formulation

Finite Element Analysis of Three-Dimensional Precision Cutting

A Finite Element Study of Chip Formation Process in Orthogonal Machining

Effects of Tool Geometrical Parameters on the Chip Formation and Cutting Force in Orthogonal Cutting