Abstract:An accurate depiction of the deformation and fracture mechanisms of metal matrix composites is the key to their rational structure and property design. In the present work, the Advanced Guerson Tvergaard Needleman (AGTN) constitutive model is firstly combined with an algorithm to reconstruct realistic 3D microstructures within the finite-element framework. We employ this model to probe the elastoplastic response and fracture behaviors of aluminum matrix composites with different volume fractions of reinforcing particles (7, 14, and 21 %) and under various loading conditions (tension, compression and shear). Real microstructures are referred to reconstruct the three-dimensional model of the composites. The AGTN constitutive model is integrated with the micromechanical damage model, which is capable of independently describing the constitutive behavior of various components, including the elastoplastic damage of the metal matrix, particle-enhanced elastic-brittle failure, and the interfacial traction separation. By using the conventional SiC p /Al composite system as a model material, we examine the stress state of the matrix and fracture mechanisms under different loading conditions by using triaxiality, Lode angle and statistical analysis. In general, the damage of SiC p /Al composites can be attributed to interfacial debonding and particle fracture, whereas the latter dominates when the volume fraction of SiC p is high. Furthermore, the critical volume fraction for the transition of damage mechanisms is found to be largely dependent on the loading conditions. Our work provides a comprehensive understanding of particle-reinforced aluminum matrix composite under in-service conditions.

Inter-phase microstress on the grain boundary in Al2O3/SiC nanocomposites

Effects of residual stress and intragranular particles on mechanical properties of hot-pressed Al2O3/SiC ceramic composites

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Effect of Particle Strength on SiCp/Al Composite Properties with Network Architecture Design

Study on microstructure of Al2O3/SiC nanocomposites

Precipitation behavior and mechanical properties of Al-Zn-Mg-Cu matrix nanocomposites: Effects of SiC nanoparticles addition and heat treatment

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Microscopic residual stress evolution at the SiC/Al interface during nanoindentation via molecular dynamics simulation

Deformation and fracture of SiCp/Al composites under complex loading conditions: A simulation study

Effect of SiC on Microstructure and Mechanical Properties of Nano-SiC/Mg-8Al-1Sn Composites

Study on the mechanical properties and microstructure of Al2O3/nano-SiC multiphase ceramics

Molecular Dynamics Study of Interfacial Micromechanical Behaviors of 6H-SiC/Al Composites under Uniaxial Tensile Deformation

SiC and ZrN Nano-Particulate Reinforced AlON Composites: Preparation, Mechanical Properties and Toughening Mechanisms

Effect of Nano- and Submicron SiC on the α-Al Dendrite Size and Mechanical Strength of SiC/A356 Composites

Microstructure and Mechanical Properties of Multiphase Strengthened Al/Si/Al 2 O 3 /SiO 2 /MWCNTs Nanocomposites Sintered by In Situ Vacuum Hot Pressing

Micromechanical Analysis of SiC/Ti6Al4V Composite Under Complex Stress State

Nano-Phase and SiC–Si Spherical Microstructure in SiC/Al-50Si Composites Solidified under High Pressure

Strengthening and Fracture Behaviors in SiCp/Al Composites with Network Particle Distribution Architecture

Effects of interfacial residual stress on mechanical behavior of SiCf/SiC composites

Numerical Simulation of the Mechanical Properties and Fracture of SiCp/6061Al Composite Materials Based on Microstructure