The Control System Design of High Frequency Inverter Welder Based on Atmega8

Hai Tao,Xing Min,Chen Liangshu

DOI: https://doi.org/10.3969/j.issn.1673-9833.2007.05.019

2007-01-01

Abstract:The main performance of Atmega8 microcomputer and the principles of high frequency inverter welderareintroduced,and itdescribeds the control system of high frequency inverter welder based on Atmega8.

What problem does this paper attempt to address?

Study on the temperature control system design based on the MCU

CHEN Jun

DOI: https://doi.org/10.3969/j.issn.1001-9227.2009.04.015

2009-01-01

Abstract:The single chip computer is applied to product temperature control system which is main control unit in the market throuyhing.A temperature control system is designed by using AT90S8535 single chip,which performance is fine and have development potential produced by ATMEL company.The basic component parts and principle are introduced,and the design of hardware circuit and software are also discussed.
Inverter Power Supply with Feedforward Regulator Based on AVR Single-Chip Computer

刘欢,陈辉明,王正仕,金圆圆

DOI: https://doi.org/10.3969/j.issn.1001-4551.2008.05.021

2008-01-01

Abstract:A new method,using AVR single-chip computer to produce SPWM waves and realize feedforward control,was proposed to accomplish full digital control of the inverter power supply.On the bases of analyzing the characteristics of the ATmega8 chip,the specific design of software-hardware structure was given.The results of the simulation and the experiments show that the circuit of the system is simple,the control scheme is reasonable and feasible,and it has wide prospect in the future.
Control System Design of High Speed Industrial Zigzag Stitching Machine

刘峙飞,黄海,韩安太,刘天泉,王树青

DOI: https://doi.org/10.3969/j.issn.1001-3881.2004.07.058

2004-01-01

Abstract:A control system based on TMS320LF2407A DSP and Winbond 78E52 microcontroller was designed for the high speed industrial zigzag stitching machine. With the movement of two-bar linkage, the whole system offers excellent responsiveness and allows the machine to create many patterns with high speed.
A New Design of Controller for Half-Bridge Current Source Inverter

QI Feng,FU Feng-feng,MA Hao

DOI: https://doi.org/10.3969/j.issn.1001-4551.2006.08.004

2006-01-01

Abstract:Due to less power devices and simple structure,halfbridge circuit is widely used in the field of middle and low power inverters.An equivalent transformation of the half-bridge inverter topology was presented,which the power devices were replaced by an AC voltage source,and the transfer function was obtained based on the superposition theorem.A(design) method of PID compensator was given and was validated by experiments.The output frequency ranged from 50~750 Hz was realized.
A Control Strategy for Power-network-incorporated Inverter Based on TMS320LF2407

Huiming Chen

2005-01-01

Abstract:On the basis of analyzing the voltage phase diagram of the power-network-incorporated inverter, a new control strategy is developed using TMS320LF2407 DSP. The scheme is simple and flexible and experimental results verified its validity.
The Design of Digital Control System for Pulsed MIG Welder

李鹤岐,徐德进,李芳

DOI: https://doi.org/10.3969/j.issn.1001-2303.2002.08.002

2002-01-01

Abstract:On the bas is of microprocessor control inverter for pulsed MIG welding,the paper introduc e the design that the microprocessor80C196KC and the digital-signal proces sor TMS320UC5402are adopted for control kernel and the double control sys tem,which realizes the digital-control for the pulsed MIG welding.
Design of Photovoltaic Grid-Connected Inverter Control

ZHANG Wei-tang,WANG Jun,ZHOU Ze-hua

DOI: https://doi.org/10.3969/j.issn.1002-087x.2013.01.024

2013-01-01

Abstract:Based on the C8051F005 single-chip design,photovoltaic grid-connected inverter control system was designed.The system was composed of two blocks of IR2110 driver 4 IR540 H bridge inverter circuit through a DC power supply through the LC filter to realize inversion.The main circuit,protection circuit,filter circuit,sampling circuit and transformer design were introduced in detail;the specific software flow chart was given.After test,the maximum value of the pressure difference of system is 0.013422%,the maximum frequency deviation is 0.343%,the resistive load under the maximum angle difference is 0.91,and the system efficiency reaches 83.00%,which fully meet or exceed the requirements of system design.
Development of Inverter AC PMIG Arc Welding Power Source

Song Zheng,Hang Zhengxiang,Hua Xueming,Wu Yixiong

DOI: https://doi.org/10.3969/j.issn.1005-2763.2006.03.020

2006-01-01

Abstract:The constitution and operating principle of AC PMIG inverter welding power source based on Intel 80C196KC single chip microcomputer are introduced.The hardware design and software program of the welding power source are discussed in detail.Tests have shown that the AC PMIG welding power source can run reliably and stably and satisfy the requirement of welding process.
An Implementation of High Frequency Grid-Connected Inverter

CHEN Tong,ZHAO Rong-xiang

DOI: https://doi.org/10.3969/j.issn.1671-7147.2006.06.017

2006-01-01

Abstract:With the emergence of world's energy problems, people began to explore the utilization of renewable energy.The paper proposes an implementation of a high frequency grid-connected inverter to renewable energy field.Firstly,it introduces the inverter control strategy of multiple-frequency SPWM based on space phasor diagram.Then,the total inverter system and some critical circuits are presented specifically as well as program flow chart.The experimental results have verified the validity of the proposed implementation and control method.
Control System Design and Simulation Based on MFC710 Inverter

Li Xin,Zhang Huaqiang

2009-01-01

Abstract:MFC710 inverter is a kind of high performance,vector control frequency converter.In this paper,the structure and circuit principle of voltage-source inverter is studied and a simulation study on induction motor's vector control algorithm based on TMS320LF2407A DSP as the main controller is made.Control system model is established and simulated in Matlab/Simulink after the mathematic model of three-phase asynchronous motor and the optimized vector control algorithm.The result of simulation which is composed of input line voltage,three-phase current,speed and motor torque is to show that the control system can obtain excellent static and dynamic characteristic.
Design of Control System for the Pipeline Arc Welding Robot

YAN Zhi-feng,LIU Li-jun,CUI Yuan-biao

DOI: https://doi.org/10.3969/j.issn.1007-2683.2006.02.027

2006-01-01

Abstract:An intelligent program is put forward to detect and control pipeline arc welding.The AT89C52 single chip processor was used as hard core;the distributed computer control system was adopted;and a master-slave system was founded.After associated debugging,it has been proved that the system has many merits,such as multiple function,rough and ready operating,stable work status and high control precision.It completely meets the technical needs of pipeline arc welding.
Research on High Frequency Inverter Resistance Spot Welding Power Supply Base on DSP

Cao Biao

Abstract:The welding of micro-components requires the welding power source to have high control accuracy and excellent dynamic characteristics.The precision and stability of the resistance spot welding power must be promoted so that the welding quality can be improved.Therefore,the high frequency inverter resistance spot welding power supply based on DSP is designed.dsPIC30F6010A is the control core of the power.The limited bipolar control scheme is used in the main inverter circuit.PWM is adopted to adjust welding current features.Limited Increment Form PI is also used in the control system to improve the precision of PWM control.The PI parameters are changed continuously to produce three-segment current,so the welding current can be precisely adjusted.The components of the power control system and the working principle of the limited bipolar control are introduced.The digital PWM generation and digital PI adjustment are described in detail and verified by tests.In the tests,the waveform of the driving voltage of inverter circuit is detected and it is proved that the welding voltage and current is stable under different parameters.It is also confirmed that the control system is stable and reliable,and has high control accuracy and response speed,thus satisfying the welding process requirements,which results in good performance of welding products.

Computer Science,Engineering
The Control System Design of a MAG Spot Welding Machine Used for the Cover and Lugs of the Hydraulic Torque Converter

杨海澜,李铸国,林涛,吴毅雄

DOI: https://doi.org/10.3969/j.issn.1001-2265.2001.11.016

2001-01-01

Abstract:In this paper, the SINUMERIK 810T CNC system of SIEMENS Co. was introduced in detail from both the hardware and the software. The system structure and flow chart were given also. It proved the reliability and automatization extent of the welding machine were enhanced by using the CNC controlling system.
Human-machine Intercommunication System for Digital Controlled Inverter Arc Welding Power Supply with Multi-Functions

ZHOU Xue-zhen,ZHU Zhi-ming,FU Ce-jian,JI Sheng-ru

DOI: https://doi.org/10.3969/j.issn.1001-2303.2007.01.003

2007-01-01

Abstract:According to the characteristics of digital-controlled inverter arc welding power supply with multi-functions,such as the distinctions of welding process between different welding methods and numerous parameters,a human-machine intercommunication system is designed and developed based on Digital Signal Processor,by using keyboard input and LCD display.Through the design of data structures with generalization and program flowcharts with optimization,the convenient configuration and unified management on the welding process and parameters are configured in this system,the users operation and display interface being compact,straight and vivid,thus enhancing the practicability of multi-functional digital controlled inverter arc welding power supply to a maximum extent.
Inverter CO2 Arc Welding Power Source with DSP-based Waveform Control

孙广,何建萍,白日晖,吴毅雄

DOI: https://doi.org/10.3321/j.issn:0253-360x.2004.04.022

2004-01-01

Abstract:A CO_2 inverter welding system with waveform control is established, in which the TMS320C240 digital signal processing (DSP) is adopted as the central controller. The structure of the system is introduced, and the working principle of the subsystems are given in detail, such as the main circuit, multi-system of DSP, setting system of the welding parameters, and the wire feeding system and the welding sequence control circuit. The output characteristic is controlled using a collateral double close-loop method, which is fulfilled by software. The principle of this control method and the output waveform are given. The results show that besides its simple structure and easy operation, the system has good controlling performance.
Structure and Control of an Inverter Type Power Source for Robot Arc Welding

Du Dong,Han Zandong

1998-01-01

Abstract:An inverter type power source system for robot arc welding is considered. The power source includes several isolated-gate bipolar transistor (IGBT) inverter power units. The output current of every individual power unit is regulated by an identical single chip microcomputer to enable the whole power source system to work over a wide range of continuous output current with good dynamic properties. ...
Development of Control System of Micro-arc Oxidation Power Supply Based on PLC

LI Yi,GONG Chun-zhi,TIAN Xiu-bo

DOI: https://doi.org/10.3969/j.issn.1002-2333.2009.07.016

2009-01-01

Abstract:The control system of micro-arc oxidation power supply based on PLC has been developed.The control system possesses excellent man -machine communication.Voltage control,current control and process control have been realized;more important,exact control of pulse frequency and width using PLC and external circuit is also achieved.The system also possesses the control function of constant current,constant voltage and conversion of working mode,etc.This makes it possible to optimize the processes and coating quality.
A Study of Automatic Welding Control System for Building Steel

Hong-ting Sun

DOI: https://doi.org/10.14257/IJCA.2014.7.2.23

2014-02-28

Abstract:This paper introduces a kind of building steel automatic welding system and it adopts submerged arc welding to complete the welding. There are four processes in the welding, including arc, melting, extrusion and insulation, which are completed by the single chip C8051F021.To ensure the arc and melting processes are accomplished accurately, the voltage and current double closed loop is used to determine whether the arc ignition is success and the melting time are estimated by arc energy accumulation from real-time judgment. Using power devices IGBT, inverse variable technology and programming logic devices (PLD) to constitute a new type of arc welding inverse variable power source. Programming on the PLD with VHDL language and get PWM’s simulation waveform. The results show that the PWM waveform designed by VHDL has high control precision, flexible control, able to adjust the power switch tube dead time, effectively protect switch safety work, and improve the efficiency of welding.

Engineering,Materials Science
Design and Realization of Arc Welding Inverter with High Frequency Full-Bridge Zero-Voltage-Switching

LEI Jun,LIU Zhi-gang,ZHANG Gang,SHEN Mao-sheng

DOI: https://doi.org/10.3969/j.issn.1673-0291.2007.02.025

2007-01-01

Abstract:This paper presents a full-bridge zero-voltage-switching(ZVS)converter which is based on peak-current mode.The proposed converter has been successfully used in the ARC-160 welding inverter with a switching frequency of 150 kHz which attains the highest level in this field.By using the phase- shift(PS)control method and the assistant resonance circuits,the ZVS of the main power switches is attained within a wide load range.The experimental results indicate that the waveforms of the convert- er are acceptable,the switching loss is low,and the full load efficiency can reach 0.88.
Study on control system for MMA welding power source

Dong Du,Zandong Han,Xuefeng Pan,Renhao Zhang

1997-01-01

Abstract:Based on the characteristics of MMA welding process, a new control system of IGBT inverter are welding power source is developed. The system adopts a new control method of output characteristics, realizes closed-loop control for open circuit state and arc state near open circuit state separately, assures the energy loss of open circuit state is lower than 10 W and is beneficial to arc stability of the welding process. Pulse width modulation in present pulse control technique for the arc inverter is developed and applied to control the welding current and arc force. Experiments show that the transient time of output current is less than 0.5 ms and has no overshoot in the whole range of the welding current. In addition, the settling time of open circuit voltage from welding or short circuit state is less than 2 ��s. The dynamic index shown above can perfectly meet the requirement of the MMA welding process.

The Control System Design of High Frequency Inverter Welder Based on Atmega8

Study on the temperature control system design based on the MCU

Inverter Power Supply with Feedforward Regulator Based on AVR Single-Chip Computer

Control System Design of High Speed Industrial Zigzag Stitching Machine

A New Design of Controller for Half-Bridge Current Source Inverter

A Control Strategy for Power-network-incorporated Inverter Based on TMS320LF2407

The Design of Digital Control System for Pulsed MIG Welder

Design of Photovoltaic Grid-Connected Inverter Control

Development of Inverter AC PMIG Arc Welding Power Source

An Implementation of High Frequency Grid-Connected Inverter

Control System Design and Simulation Based on MFC710 Inverter

Design of Control System for the Pipeline Arc Welding Robot

Research on High Frequency Inverter Resistance Spot Welding Power Supply Base on DSP

The Control System Design of a MAG Spot Welding Machine Used for the Cover and Lugs of the Hydraulic Torque Converter

Human-machine Intercommunication System for Digital Controlled Inverter Arc Welding Power Supply with Multi-Functions

Inverter CO2 Arc Welding Power Source with DSP-based Waveform Control

Structure and Control of an Inverter Type Power Source for Robot Arc Welding

Development of Control System of Micro-arc Oxidation Power Supply Based on PLC

A Study of Automatic Welding Control System for Building Steel

Design and Realization of Arc Welding Inverter with High Frequency Full-Bridge Zero-Voltage-Switching

Study on control system for MMA welding power source