Abstract:For decades, researchers have struggled to solve 6-axis robotic vibration while machining hard-to-cut materials. On the other hand, wire electric discharge machining (WEDM) stands out as a non-conventional machining process able to cut large and complex profiles of any conductive hard-to-cut material with minor non-contact forces. Thus, WEDM is a promising process to be combined into a robot to overcome vibration and low accuracy. However, the robot characteristics of a high degree of freedom combined with payload limitation oblige to separate the heavy wire winding system from the robot end-effector, demanding an equally high degree of freedom and unconventional solutions to feed and control the wire electrode. This study designs and reports experimental findings of the first robotic WEDM apparatus based on a high-speed winding system with 600 m of wire length, capable of controlling the wire speed from 1 to 10 m/s and wire tension from 0.1 to 10 N. The system adopts flexible outer cases to travel and reciprocate the wire into a 7-axis robotic system composed of a 6-axis robot and an external rotating axis. The proposed design is a highly dynamic process whose wire tension and speed are achieved by a hybrid controller to cope with the non-linear relation of speed and tension provided by the magnetic clutch. It combines a regression open-loop control for optimality and wire breakage avoidance with a closed-loop control to guarantee admissibility while coping with wire friction disturbances. The findings review a novel wire winding system capable of controlling usual wire disturbance and stepped surface of reciprocating high-speed WEDM as well as additional friction and elastic behaviour of the flexible case, delivering wire tension of ± 12% along with stable EDM process and uniform surface roughness between wire reciprocation areas with a Ra of 2.94 μm. Potential adoption of the method can finally make 6-axis robots a feasible and advantageous technique compared to computer numeric control (CNC) while shaping monolithic and complex workpieces of conductive and hard-to-cut materials.

Study on Wire Feeder System with H Bridge Circuit Based on SCM

Precise Control of Needle Position of the High-Speed Flat Sewing Machine

Design of EBW Stabilized High-Voltage Source Based on Fuzzy PID Control

Automatic Feeder Design in Paper Honeycomb Parts Fixation System

A Study of Automatic Welding Control System for Building Steel

Design of a New Trigger Circuit for Three-phase Semicontrol Bridge

Study and Development of Automatic Control System for Chamfering Machine Based on PLC

High-speed Electronic Weft Feeder Control System Based on DSC

Arc force self-adapt control system of invert arc welding machine

Research and Application of Vector Control Strategy for Weft Feeder Motor System Based on Dspic

Control and modulation for APF-STATCOM based on cascaded H-bridge converter

Gap status identification and control of wire electrochemical micromachining

Real-time Control System of Torch-height Based on Through-the-wire Sensor

Design and Realization of Arc Welding Inverter with High Frequency Full-Bridge Zero-Voltage-Switching

Human-machine Intercommunication System for Digital Controlled Inverter Arc Welding Power Supply with Multi-Functions

Study Of Seam Tracking System Based On 80c196kc

ELECTRODE WIRE FEEDER FOR MIG/MAG AND TIG WELDING PROCESSES

Control design of a reciprocating high-speed wire feed system for 7-axis robotic electric discharge machining

A High-Precision Constant Wire Tension Control System for Improving Workpiece Surface Quality and Geometric Accuracy in WEDM

Design of Control System for the Pipeline Arc Welding Robot

Automatic underwater arc welding seam-tracking system based on flux-core wire and rotating arc sensor