Abstract:N,N-Di-hydroxyethyl amine-3-propionic acid methyl ester was prepared in a nitrogen atmosphere. And SiO2-HBP-L was in situ synthesized by grafting from with the monomers and alpha-caprolactone. The structure and morphology were characterized by FTIR, XPS and TG analysis. The results show that the hyperbranched polyester is successfully grafted at the surface of nano-SiO2. Compared with the nano-SiO2, the SEM shows that the dispersion and compatibility of SiO2-HBP-L in the ethanol and rubber matrix is better. Then SiO2-HBP-L/SBR composites were prepared by using the direct mixing method. Vulcanization performance tests show that the curing time (T-90) of the composites are much shorter and the composites' total crosslinking density is increased with respect to SiO2/SBR composites. When the composites with 30 phr SiO2-HBP-L, the T-90 was reduced to 3.30 min. What is more, SiO2-HBP-L/SBR composites have a great improvement of mechanical properties and wear resistance. It shows that the tensile strength, elongation at break, tear strength and wear resistance of the composites are increasing with the increase of contents of SiO2-HBP-L. The tensile strength, elongation at break of the composites with 30 phr SiO2-HBP-L were 14.8 MPa and 22.2 kN/m(2), and its wear resistance decreased to 289.4 mm(3). Nano-SiO2 modified with long-subchain hyperbranched polyester (SiO2-HBP-L) was used in the preparation of SiO2-HBP-USBR composites. The results show that the performance of SiO2-HBP-L is better than that of nano-SiO2 in the reinforcement of SBR.

Radiation preparation of nano-powdered styrene-butadiene rubber (SBR) and its toughening effect for polystyrene and high-impact polystyrene

Radiation preparation of ultrafine carboxylated styrene-butadiene rubber powders and application for nylon 6 as an impact modifier

The Preparation and Characterization of SBR/PS Core-Shell Particles by Gamma Irradiation

Radiation Graft-Copolymerization of Ultrafine Fully Vulcanized Powdered Natural Rubber: Effects of Styrene and Acrylonitrile Contents on Thermal Stability

Radiation-induced Copolymerization of Styrene/n-Butyl Acrylate in the Presence of Ultra-Fine Powdered Styrene–butadiene Rubber

Design and Preparation of Cross-Linked Polystyrene Nanoparticles for Elastomer Reinforcement

Preparation of nano polymer filler and properties of the filled rubber compound

Design and Preparation of Cross‐linked Α‐methylstyrene‐acrylonitrile Copolymer Nano‐particles for Elastomer Reinforcement

Novel methods for synthesis of high-impact polystyrene with bimodal distribution of rubber particle size

Strengthening and Toughening Styrene-Butadiene Rubber by Mechanically Interlocked Cross-Links

Preparation and properties of SBR/PPTA nanocomposite via in‐situ interfacial polycondensation

Loading of rubber nanocomposites by lead nanoparticles for gamma radiation shielding

Preparation of Hyperbranched Polyester Modified Nano-Sio2 and Its Application in Sbr

Preparation and Properties of Powder Styrene-Butadiene Rubber Composites Filled with Carbon Black and Carbon Nanotubes

Preparation of Polystyrene/sio2 Nanosphere and Its Application in Toughening PP Matrix

Toughening Rubber by in Situ Construction of Hierarchical Coordination Complexes with a Sulfur-Based Ionomer

Styrene-Butadiene Rubber by Miniemulsion Polymerization Using In Situ Generated Surfactant

The Relationship between Microstructure and Properties in PP/Rubber Powder/nano-CaCO3 Ternary Blends

Toughening of Polypropylene by Combined Rubber System of Ultrafine Full-Vulcanized Powdered Rubber and SBS

Preparation and Mechanical Properties of Toughened ABS Resin via Bulk Polymerization

Toughening of Polystyrene with Ethylene-Propylene-Diene Terpolymer(EPDM) Compatibilized by Styrene-Butadiene-Styrene Block Copolymer(SBS)