Abstract:Carboxylated acrylonitrile butadiene rubber/cryptocrystalline graphite prepared by latex blending showed a smoother worn surface, less and smaller wear debris, and lower steady state friction coefficient and specific wear rate compared to the mechanical blending. As a cost‐effective and environmentally friendly natural mineral, cryptocrystalline graphite (CG) is applied in rubber materials and its performance has been evaluated. In this work, the filler dispersion and mechanical and tribological properties of carboxylated acrylonitrile butadiene rubber (XNBR)/CG composites by different preparation methods were studied. XNBR/CG composites prepared by latex blending (XNBR/CG‐L) exhibited better mechanical and tribological performance, higher toughness, and lower heat build‐up than those prepared by mechanical blending (XNBR/CG‐M). These differences were ascribed to the filler dispersion degree, filler amount and dispersed size, and also filler–rubber interfacial interaction. Adding CG was conducive to improving the stability of the friction coefficient and reduced the wear rate via the formation of graphite lubricant and transfer films. The tribological performance of XNBR/CG‐L was superior to that of XNBR/CG‐M because of the improved tensile strength, tear resistance, and toughness as well as lower temperature rise. Scanning electron microscopy (SEM) and optical microscope observation showed a smoother worn surface, less and smaller wear debris of XNBR/CG‐L, and a more uniform transfer film on the steel counterpart surface. The relevant results provided new insight into the performance and structural design of CG/rubber composites.

Synthesis and Properties of Nano Carboxylic Acrylonitrile Butadiene Rubber Latex Toughened Phenolic Resin

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

Aramid Nanofiber/XNBR Nanocomposite with High Mechanical, Thermal, and Electrical Performance

Effect of elastomeric nanoparticles on properties of phenolic resin

PHENOLIC RESIN MODIFIED BY COPOLYMERIZATING WITH NITRILE BUTADIENE RUBBER

Nanokaolin reinforced carboxylated nitrile butadiene rubber/polyurethane blend-based latex with enhanced tensile properties and chemical resistance

STUDY ON NYLON 6／SUPERFINE RUBBER PARTICLES COMPOSITES VIA IN SITU POLYMERIZATION

Preparation and Properties of Nanocomposites Based on Different Polarities of Nitrile–butadiene Rubber with Clay

Preparation and Characterization of Thermoplastic Polyurethane–urea and Carboxylated Acrylonitrile Butadiene Rubber Blend Nanocomposites

Effect of rubber on properties of nylon-6/unmodified clay/rubber nanocomposites

Enhancement of the mechanical and tribological properties of carboxylated acrylonitrile butadiene rubber filled with cryptocrystalline graphite by different preparation methods

Improved mechanical properties and abrasion resistance of styrene butadiene rubber/butadiene–styrene–vinyl pyridine rubber/clay nanocomposites with strong interfacial interaction

Effect of the Rubber Components on the Mechanical Properties and Braking Performance of Organic Friction Materials

Effect of Grafted Polytetrafluoroethylene Nanoparticles on the Mechanical and Tribological Performances of Phenol Resin

Effect of triethylene glycol bis(3‐tert‐butyl‐4‐hydroxy‐5‐methylphenyl)propionate on structure and mechanical properties of nitrile butadiene rubber/clay nanocomposites

Radiation preparation of nano-powdered styrene-butadiene rubber (SBR) and its toughening effect for polystyrene and high-impact polystyrene

Effect of ionic liquid modified carbon nanotubes on the properties of nitrile butadiene rubber and nitrile butadiene latex nanocomposites

Preparation and Mechanical Properties of Toughened ABS Resin via Bulk Polymerization

Expanded bentonite clay by bio-adhesive resins and its impact on the mechanical, adhesion, and ultrasonic properties of NR/SBR/polyester cords systems

Cross-Linking Characteristics, Morphology, Dynamics, and Mechanical and Thermal Properties of Polychloroprene/Polybutadiene/Nano-Zinc (CR/BR/nZn) Compositions with Reduced Fire Hazard

Effects of the Reinforcement and Toughening of Acrylate Resin/Caco3 Nanoparticles on Rigid Poly(Vinyl Chloride)