Abstract:An alternative approach for the synthesis of styrene butadiene rubber (SBR) copolymer latexes was explored in order to obtain low gel fractions and high solid contents. The ultra-turrax-assisted miniemulsion stabilized by in situ surfactant generation was adopted as the main strategy since this technique can inhibit the eventual presence of secondary nucleation producing polybutadiene particles and also control the cross-linking degree. Styrene monomer was first miniemulsified using an ultra-turrax and in situ generated surfactant using either hexadecane (HD) or octadecyl acrylate (ODA) as the hydrophobe. Dynamic light scattering (DLS) measurements of droplet size indicated faster stabilization and the production of smaller droplet diameters ca. 190 nm (PdI = 0.08) when employing in situ generated potassium oleate (K-Oleate) in comparison to SDS-based miniemulsions. High butadiene-level SBR latexes with ca. 50% solids content, a glass transition temperature (Tg) of −52 °C, and a butadiene to styrene weight ratio of 75:25, were then obtained using the miniemulsion droplets as seeds. Turbiscan and DLS measurements revealed a very stable resulting latex with SBR particle diameter of ca. 220 nm and a low polydispersity index (PdI). Secondary nucleation was prevented as indicated by the low Np/Nd value. Cryo-TEM images showed a narrow distribution of particle size as well as the absence of agglomeration. The gel content was below 10% when tert-dodecyl mercaptan (t-DM) was used as chain transfer agent (CTA).

Novel methods for synthesis of high-impact polystyrene with bimodal distribution of rubber particle size

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

Radiation preparation of nano-powdered styrene-butadiene rubber (SBR) and its toughening effect for polystyrene and high-impact polystyrene

Hypercrosslinked Polystyrene Microspheres with Bimodal Pore Size Distribution and Controllable Macroporosity

Synthesis of Sub‐micrometer Core–shell Rubber Particles with 1,2‐azobisisobutyronitrile As Initiator and Deformation Mechanisms of Modified Polystyrene under Various Conditions

Synthesis of Styrene/isoprene/butadiene Integrated Rubber with Wide Glass Transition Temperature by Reactive Extrusion

Molecular Simulation of the Effect of Graft Structure on the Miscibility of High‐impact Polystyrene Blends

Agglomeration of the Poly(butadiene-Styrene) Latex Triggered by CO2 Bubbling and the Preparation of Poly(methyl Methacrylate-Butadiene-styrene) Core/shell Particles with a Wide Size Distribution

Synthesis of Monodisperse Crosslinked Polystyrene Microspheres Via Dispersion Copolymerization with the Crosslinker‐postaddition Method

Preparation of micron-size crosslinked microspheres by dispersion copolymerization of polystyrene/2,2′-oxy-bisethanol diacrylate

Preparation of Polystyrene Particles with Narrow Particle Size Distribution by Γ-Ray Initiated Miniemulsion Polymerization Stabilized by Polymeric Surfactant

Styrene-Butadiene Rubber by Miniemulsion Polymerization Using In Situ Generated Surfactant

Styrene-Isoprene Copolymers with High Rubber Contents Prepared by Reactive Extrusion

Facile Method to Prepare Monodisperse Polystyrene Particles by Hydrothermal Process

The Mechanical Properties of Low Cis-Butadiene Modified HIPS

Facile Synthesis of Large Scale and Narrow Particle Size Distribution Polymer Particles Via Control Particle Coagulation During One-Step Emulsion Polymerization

Radiation-induced Copolymerization of Styrene/n-Butyl Acrylate in the Presence of Ultra-Fine Powdered Styrene–butadiene Rubber

Covalent Grafting Approach for Improving the Dispersion of Carbon Black in Styrene–Butadiene Rubber Composites by Copolymerizing P-(2,2′-diphenylethyl)styrene with a Thermally Decomposed Triphenylethane Pendant

Influence of styrene-b-butadiene copolymer types on phase morphology and polymer partitioning between demixed-macrophases from HIPS-mimicking unstable blends

Monodisperse Micrometer-Size Carboxyl-Functionalized Polystyrene Particles Obtained by Radiation-Induced Polymerization and the Research on Its Application

PREPARATION OF MONODISPERSE CROSS-LINKED POLYSTYRENE MICROSPHERES BY COMBINING DISPERSION POLYMERIZATION WITH HYDROTHERMAL PROCESS