Abstract:The attainment and maintenance of a low temperature environment is essential for aerospace cryogenic detectors to achieve their required performance. Developing cryocoolers with features of high efficiency, compact structure, and long lifetime is the main challenge for cryogenic detector cooling. In this paper, a high efficiency thermally-coupled two-stage Stirling type pulse tube cryocooler working at 35 K for HgCdTe long wave infrared detector cooling is designed and tested. The thermally-coupled type avoids gas distribution at cold side which minimizes the inter-stage influence. The whole cryocooler is driven by one linear compressor which enables compact structure. The influence of operation frequency and mean pressure is studied by numerical calculation and experiments to determine the optimum operation condition. Acoustic impedance characteristics of both stages and the whole cold finger are also analyzed by comparing performance of cryocooler with different frequency, mean pressure and structure dimensions. The distributions of acoustic power and phase angle are presented to study the relation between impedance characteristic and the cooling performance. Impedance match between compressor and cold finger is also discussed by analyzing the efficiency of the linear compressor and the performance of cryocooler with different pulse tubes. Under optimum impedance match and operation condition of a working frequency of 39.2 Hz and a mean pressure of 2.45 MPa, the cryocooler provides a cooling power of 1 W at 35.1 K with an input electrical power of 150 W, which indicates a relative Carnot efficiency of 5%. This is a rather high efficiency for developed Stirling type multi-stage pulse tube cryocooler working at 35 K with only inertance tubes as phase shifter. The development of this cryocooler lays a solid base for the further optimization to realize a competitive candidate for aerospace cooling requirements.

A Cryogenic Front End for CDMA and UMTS Wireless Base Stations

Field Trial of an HTS Filter System on a CDMA Base Station

A 17.7–19.2-Ghz Receiver Front End with an Adaptive Analog Temperature- Compensation Scheme

A High Performance Hts Filter Subsystem for Cdma

A demonstration HTS base station sub-system for mobile communications

Design Of Cryogen-Free Operation Of Fits Filter Subsystem With Co-Axial Pulse Tube Cryocoolers

CRYOGENIC CHARACTERISTICS OF HIGH ELECTRON MOBILITY TRANSISTOR AND LOW NOISE AMPLIFIERS

Fabrication and Laboratory Testing of A High-Temperature Superconducting Subsystem for Dsc1800 Mobile Communications

Development of cryogenically-cooled low noise amplifier for mobile base station receivers

An HTS 20-Pole Microstrip Filter for GSM-1800 Base Stations

VHF/UHF Cryogenic LNA for Deep Space Exploration and Radio Astronomy

A Two-Stage Thermally-Coupled Pulse Tube Cryocooler Working at 35 K for Space Application

Thermal Testing for Cryogenic CMB Instrument Optical Design

Field Test of HTS Receivers on CDMA Demonstration Cluster in China

Design of Rx Filter for WCDMA Direct-Conversion Front-End Using FBAR Technology

Phase Matching Technique For Hts Filter-Cryogenic Lna Subsystem

The design and fabrication of low RF CLNA for HTS receiver

Design of Balanced RF Filter for Wireless Applications Using FBAR Technology

Design And Simulation Of Low Noise Amplifier For Radio Frequency Front End Of Wireless Communication

Design and performance of a compact forward-coupled HTS microstrip filter for a GSM system