CRYOGENIC TUNING TECHNIQUE OF HTS FILTER
Liang Yong,Piao Yun-Long,ZHang Xiao-Ping,Mu Li-Juan,Wei Bin,Cao Bi-Song,Gao Bao-Xin
DOI: https://doi.org/10.3969/j.issn.1000-3258.2006.03.010
2006-01-01
Abstract:An HTS filter which tuned at cryogenic temperature was presented in this paper. The electromagnetic field was tuned during the tuning. This technique can be used to correct the deviations from substrate thickness, non uniformity of the substrate thickness and the error of the dielectric constant. The purpose of tuning is to optimize the performance and increase the yield of the HTS filter. The fabricated filter’s performance normally was worse than the design result, including the insertion loss, return loss and out-of-band rejection after the fabrication. As in the sample, a 4-pole filter, with the central frequency of 2.868GHz, -0.04dB of S_ 21 , -21dB of S_ 11 and bandwidth of 15MHz was designed and fabricated. In this report, 4-pole filter was tuned at the cryogenic temperature to show the tuning process. It can improved the S21 from -0.44dB to -0.21dB, return loss in the low frequency ends from -8.2dB to -14.27dB, out of band rejection from -28dB to -47dB, respectively. The central frequency also can be shift to a low end about 3.1MHz. As a result, the performance of the tuned filter is closer to the designed result.