Abstract:Although the electromagnetic-coupling chemical vapor infiltration（E-CVI） has been proven of a highefficiency technique for producing carbon fiber reinforced pyrocarbon（Py C） matrix（C/C） composites, a deep understanding of the deposition kinetics and mechanism of Py C matrix is still lack. In this work,a deposition model with uniform electric field but gradient magnetic field was set up by using unidirectional carbon fiber bundles as the substrates to investigate the deposition kinetics and mechanism.Meanwhile, the polarizability, and the chemical adsorption and dehydrogenation barriers of hydrocarbon were simulated based on the density functional theory（DFT） and the Climb-image nudged elastic band method, respectively. The E-CVI process exhibited extremely high Py C deposition rates of 8.7, 11.5, 16.5 and 22.7 nm/s at 700, 750, 800 and 850 °C, respectively, together with a significantly low apparent activation energy of 57.9 k J/mol within the first 5 min. The Py C deposited at different temperatures with different time shows a smooth laminar structure with low coherent length and graphitization degree. The theoretical calculation and simulation results indicated that the electrons existing on the carbon fibers and the accelerated motion of radicals with preferred orientation forced by the derived magnetic field have reduced the energy barrier for the deposition process, thereby resulting in low apparent activation energy and high Py C deposition rate. The results of this work may shed a light on how to better direct the preparation of C/C composites by E-CVI process with high quality and efficiency.

Cathode Spot Movements along the Carbon Fibres in Carbon/carbon Composites

Cathode Spot Movement on a Continuous Carbon Fiber Reinforced Cu Matrix Composite in Vacuum

DYNAMICS OF CATHODE SPOT MOVEMENT ON A CARBON/CARBON COMPOSITE IN VACUUM

Single Carbon Fiber/Acid-Treated CNT-Epoxy Composites by Electro- Micromechanical Technique and Wettability Test for Dispersion and Self-Sensing

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Cathode spot movements and chopping current of pure graphite and copper-graphite in vacuum

Deposition Kinetics and Mechanism of Pyrocarbon for Electromagnetic-Coupling Chemical Vapor Infiltration Process

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Influence of microstructure of CuCr25 cathode on the motion of vacuum arc spots

INFLUENCE OF THE MICROSTRUCTURE OF ELECTRODE MATERIALS ON THE MOTION BEHAVIORS OF VACUUM ARC CATHODE SPOT

Real-Time Observation of Damage Nucleation in 3D Braided Carbon/Carbon Composites

In situ characterization of the flexural behavior and failure mechanism of 2D needle-punched carbon/carbon composites by digital image correlation

Micro- and nano-structural investigations of C/C composites

Real-Time Observation of Damage Nucleation in Three-Dimensionally Reinforced Carbon/Carbon Composites and Role of Bundle/Matrix Interface

Cathode Erosion of Graphite and Cu/C Materials in Airarcs

Nano-analysis on the Structure and Chemical Composition of the Interphase Region in Carbon Fiber Composite Part A Applied Science and Manufacturing

Nano-analysis on the structure and chemical composition of the interphase region in carbon fiber composite

Three-stage channel sprays carbon nanotubes onto carbon fibers surface, preparing high performance carbon fibers composites

Study of Structure–mechanical Heterogeneity of Polyacrylonitrile-Based Carbon Fiber Monofilament by Plasma Etching-Assisted Radius Profiling

Internal Three-Dimensional Strain Evolution of the Failure Process for Short Carbon Fiber Composite Through in Situ Synchrotron Radiation X-ray Computed Tomography

Effect of the Microstructure of Electrode Materials on Arc Cathode Spot Dynamics