Abstract:This report describes the thermal behaviour of nanotitania precursors and the influence of various amines and peroxide treatment on properties of TiO2. Thermal degradation of amine-containing amorphous (peroxo)titanates was examined via TG–DTA coupled with evolved gas analysis (EGA) by mass spectrometry in inert and oxidizing atmosphere. Crystallization to anatase and subsequent transformation to rutile are studied by in situ HT-XRD, which provided information about particle growth and mutual ratio between allotropic phases. In argon, the samples underwent a two-step degradation process, involving the release of moisture and decomposition or evaporation of amine, up to 450 °C, while in air conditions, the organic component could be oxidized in an additional third step at even higher temperatures. EGA confirmed the presence of the original amine in the amino-titanates, while the organic parts reacted with oxygen evolved from the peroxide group to form oxidation products (H2O, CO2 and NOx). The crystallization of nanoanatase began simultaneously/subsequently with the second degradation step. While peroxide treatment increased the initial particle size (from 5 to 40 nm), the choice of amine had a significant impact on the anatase formation temperature (325–425 °C). The anatase particle size increased with higher formation temperature after H2O2 treatment, while the particle size of amino-titanates decreased. The rutile formation temperature was directly dependent on the anatase particle size. Hitherto prepared amine-treated (peroxo)titanates demonstrated good thermal endurance of anatase nanoparticles (800–900 °C), which could be advantageous for various photocatalytic applications. The obtained results provide a method to synthetize tailored TiO2 with desired properties by adjusting the synthetic conditions (selection of precipitation agent and peroxide treatment) and annealing temperatures.

Effects of amines additives on the shapes of TiO2 nanoparticles

Controlling Shape and Size of TiO2 Nanoparticles with Sodium Acetate

Controllable Synthesis of SiO2 Nanoparticles: Effects of Ammonia and Tetraethyl Orthosilicate Concentration

INFLUENCE OF WATER CONTENT ON CONTENT AND CHARACTERISTIC OF TiO2 DURING PREPARATION OF TiO2 NANOPARTICLES ON SiO2 SURFACE

Effect of Key Parameters on the Morphology Transformation of Three-Dimensional TiO2 Solid Microspheres

pH control on preparation of nano-TiO_2 by gel-sol process

Effect of organic amines during synthesis of titanium silicalite

Photocatalytic Activity of Different Shape-controlled TiO2 Nanoparticles Toward Methyl Orange

Morphology Control of Electrodeposited ZnO Using Different Amino Acids As Soft Templets

Effects of Diethanolamine on the Evolution of Silver/titanium Dioxide Sol–gel Process

Effects of Atoleine on Preparation and Thermal Behaviors of TiO2 Gel Microspheres Fabricated Via Oil-in-water Emulsions

Preparation and Structural Analysis of TiO2 Photocatalytic Film Modified by Triethylamine

Effects of Organic Additives on Crystallization Process and the Adsorption Performances of Zeolite A

The effects of additive on properties of Fe doped TiO2 nanoparticles by modified sol-gel method

Shape Evolution of Highly Crystalline Anatase Tio2 Nanobipyramids

Effect of amines on (peroxo)titanates: characterization and thermal decomposition

Morphology control of titanium oxides by tetramethylammonium cations in hydrothermal conditions

Synthesis and Characterization of Size-Controlled Titania Nanorods through Double Surfactants

Effect of Substrate Pretreatment on Controllable Growth of TiO2 Nanorod Arrays

Morphological Control of 1D and 3D TiO2 Nanostructures with Ammonium Hydroxide and TiO2 Compact Layer on FTO Coated Glass in Hydrothermal Synthesis

Synthesis and characterization of nanosized anatase TiO2 cuboids