Abstract:Polyurethane foam (PUF) is one of the most well-known cellular materials and is widely employed in various industrial and biomedical fields thanks to its many advantages. These include mechanical and material characteristics such as low density and thermal conductivity, and high specific elastic modulus and strength. Despite of these advantages, the PUF has extremely complex material nonlinearity, with changes in density and strain rate, which is a major obstacle to material design and the application of PUF-based structures. PUF has elasto-viscoplastic behavior including three stages of material features, linear elasticity, softening/plateau with stress drop and densification. These phenomena depend strongly on strain rate and density. Therefore, in this study, a phenomenological constitutive model, namely, an elasto-viscoplastic model, was proposed to describe the density- and strain rate-dependent material nonlinear behavior of PUF. The yield surface-independent plastic multiplier, and the hardening- and softening-associated internal state variables proposed by Frank and Brockman, and Zairi et al. were adopted in the constitutive model, respectively. The proposed constitutive model was discretized using the implicit time integration algorithm and was implemented into a user-defined subroutine of the commercial finite element analysis program, ABAQUS. At the same time, a deterministic identification method for material parameters of the constitutive model was introduced to predict the precise material response of PUF under arbitrary densities and strain rates. To do this, the three-dimensional constitutive model was contracted to a one-dimensional equation, and the explicit equation for each material parameter was derived. Then, the strain hardening- and softeningdependent material parameters were calculated using experimental results, such as the work hardening ratestress curve and the yield stress-strain rate curve. After analyzing the obtained material parameters, it was found that the material parameters were strongly dependent on the density and the strain rate. Consequently, the macroscopic material response of PUF, such as a uniaxial compressive stress-strain curve, can be predicted based on the proposed method in this study.

Study on Polyurethane Foam Materal Constitutive Relationship

A Study of Experimental Method for Mechanical Properties of Rigid Polyurethane Foam under Hydrostatic Compressive Loading

Mechanical Performance of Polystyrene Foam (EPS): Experimental and Numerical Analysis

Topological Characteristics and Mechanical Properties of Uniaxially Thermoformed Auxetic Foam

Impact Properties of Uniaxially Thermoformed Auxetic Foams

Experiments and parameter identification for the stress-strain relation of polyurethane foam

Compressive properties and energy absorption of rigid polyurethane foam

Study of the Constitutive Relation of Low Density Plyethylene Foam under Compression

Influence of Strain Rate and Temperature on Compressive Properties and Energy Absorption Efficiency of Expanded Polystyrene and Flexible Polyurethane Foam

Investigation of Density- and Strain Rate-dependent Strain Hardening-softening-coupled material Behavior of Polyurethane Foams using Elasto-viscoplastic Constitutive Model

Mechanical Properties of Polyurethane Foams Prepared from Liquefied Corn Stover with PAPI.

Experimental approach for characterizing the nonlinear, time and temperature‐dependent constitutive response of open‐cell polyurethane foams

Constitutive model with fractional derivatives for polyurethane foams under uniaxial compression

Effect of Strain Rate on the Compressive Behavior of Polyurethane Bonding

Experiment and Modeling for Compressive Strength of Polyurethane Grout Materials

Assessment of Multiaxial Mechanical Response of Rigid Polyurethane Foams

Study on the Mechanical Properties of Hybrid Reinforced Rigid Polyurethane Composite Foam

Optimization of Reaction Conditions for Polyurethane Foam Synthesis with Liquefied Corn Stalk by Response Surface Methodology

Investigation On Compression Mechanical Properties Of Rigid Polyurethane Foam Treated Under Random Vibration Condition: An Experimental And Numerical Simulation Study

Study on Quasi-Static Uniaxial Compression Properties and Constitutive Equation of Spherical Cell Porous Aluminum-Polyurethane Composites

The Toughness of Polypropylene Fiber-Reinforced Foam Concrete under Various Uni- and Tri-Axial Compression Loads