Abstract:Little detailed information is available on the microwave drying characteristics of potato and the use of different microwave powers to dry food products. Experiments were conducted to study the microwave drying characteristics and the dried quality of potato. The study focuses on describing the microwave drying characteristics of potato and discussing the effect of sample thickness, drying power and mass. The results show that if the power level increases, the mass load decreases and the thickness of the sample decreases, the dehydration rate increases and the drying energy consumption decreases. There are two falling rate periods during microwave drying of potato: the first falling rate period is for a moisture content of more then 1.1 (dry basis, DB); the second falling rate period is for a moisture content of less than 1.1 (DB). The same water loss will consume more energy when the moisture content is less than 1.1 (DB). A two-stage drying process was employed during microwave drying of potato. The microwave power of the first drying stage differed form that of the second drying stage. The moisture content of the breakpoint for the conversion of the first drying stage into the second drying stage is a moisture content of 1.1 (DB). A quadratic orthogonal regression experiment was conducted, and the effects of slice thickness, the first drying load power and the second drying load power on sensory quality, the rehydration ratio and the energy consumption rate were established. The slice thickness, the first drying load power and the second drying load power linearly affected the three indices. The effect of the product of the second drying load power and the potato slice thickness on the rehydration ratio and the energy consumption rate is significant. The optimum drying parameter combination for the three indices was obtained. The rehydration ratio of the dried products decreased with an increase of the second drying load power and the slice thickness. The concave curves of the sensory quality versus the three factors were shown.

Microwave Drying of Wood Strands

Drying Kinetics and Color Change of Bamboo Shoots During Microwave Drying

Microwave Heating and Devolatilization Characteristics of Polyethylene Particles in a Fixed‐bed Devolatilizer

Microwave Drying Characteristics of Potato and the Effect of Different Microwave Powers on the Dried Quality of Potato

Characteristics and Model of Microwave Drying Sweet Potato

Application Development of Microwave Drying Technology in the Preparation of Chinese Medicine

Study on moisture content change of drying bamboo stems under microwave-vacuum

Microwave drying behavior, energy consumption, and mathematical modeling of sewage sludge in a novel pilot-scale microwave drying system

The Drying Characteristics and Technology of Potato Slices by Microwave

Microwave Drying of Fabrics

Drying characteristics and drying quality of carrot using a two-stage microwave process

Studies on the Microwave Drying Characteristics and Mathematical Model of Water-oat

Optimization of Microwave Vacuum Low-temperature Drying Process for Rehmannia Glutinosa Libosch Leaves Extract

Microwave Vacuum Drying Properties and Kinetics Model of Radix Paeoniae Rubra Extract

DRYING CHARACTERISTICS AND DRYING QUALITY OF KIDNEY BEANS USING A TWO-STAGE MICROWAVE PROCESS

Effect of Microwave on Drying and Slurryability of Lignite

Microwave Drying of Food and Agricultural Materials: Basics and Heat and Mass Transfer Modeling

Thin-layer drying characteristics and modeling of Ximeng lignite under microwave irradiation

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

Application progress of the microwave - assisted drying technology

Analysis of heat and moisture transfer in the microwave drying of potatoes