Abstract:<p>Microwave drying is attracting increasing attention due to its energy efficiency. A self-developed pilot-scale microwave dryer was used in this study to dry two different common types of sewage sludge, namely mechanically dewatered sewage sludge and composting dewatered sewage sludge, by using two heating modes: constant temperature and constant power modes. The microwave drying behavior, specific energy consumption, average drying rate, energy efficiency, and drying effect were explored considering the influences of microwave output power, initial mass, and heating mode. Results showed that the output power had the largest influence on specific energy consumption, energy efficiency, and drying efficiency, followed by the constant temperature and initial mass. The specific energy consumption of mechanically dewatered sewage sludge decreased by roughly 14%. By contrast, the average drying rate increased by approximately 6%, and the energy efficiency increased by approximately 20% for each 1 kW increase in output power. Meanwhile, composting dewatered sewage sludge displayed drying effects at an output power of 3 kW, and the temperature exceeded 80 °C. The comparison of the two modes suggested that the constant temperature mode was better than the constant power mode considering product quality and operational safety. Compared with six thin-layer drying mathematical models, the Midilli–Kucuk model could provide a good fit for the constant temperature mode. The proposed microwave drying process exhibited effective performance in drying rate. This process also demonstrated considerable application potential for sewage sludge drying.</p>

Application progress of the microwave - assisted drying technology

Application Development of Microwave Drying Technology in the Preparation of Chinese Medicine

Application Analysis of Microwave Drying for Ceramic Bodies

The Research Process of Microwave Drying Technology and Equipment for Agricultural Products

The Research Process of Microwave Fluidization Combined Drying Technology in Fruit and Vegetables

Review of recent applications and research progress in hybrid and combined microwave-assisted drying of food products: Quality properties.

Trends in Microwave and Low-frequency Ultrasonic Assisted Drying of Fruit and Vegetables

Trends in Microwave-Related Drying of Fruits and Vegetables

Application of Microwave Heating Drying in Metallurgy

Recent Developments in Microwave-Assisted Drying of Vegetables, Fruits, and Aquatic Products—Drying Kinetics and Quality Considerations

The Drying Characteristics and Technology of Potato Slices by Microwave

Studies on the Microwave Drying Characteristics and Mathematical Model of Water-oat

Recent Development of Microwave Fluidization Technology for Drying of Fresh Fruits and Vegetables

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

Microwave curing technology and its application in polymers

Medium and short-wave infrared drying: Principles, applications, and future trends

Research progress and application of ultrasonic- and microwave-assisted food processing technology.

Tunnel-type Continuous Multi-Physical Field Drying Equipment: Design, Numerical Simulation and Application

Microwave drying behavior, energy consumption, and mathematical modeling of sewage sludge in a novel pilot-scale microwave drying system

Analysis of heat and moisture transfer in the microwave drying of potatoes

INFLUENCE OF MICROWAVE PRETREATMENT ON DRYING CHARACTERISTICS AND PHYSICOCHEMICAL PROPERTIES OF BIOMASS