DRYING CHARACTERISTICS AND DRYING QUALITY OF KIDNEY BEANS USING A TWO-STAGE MICROWAVE PROCESS

J. WANG,Y. W. WANG,J. W. WANG,X. L. HE

DOI: https://doi.org/10.1111/j.1745-4549.2007.00170.x

2008-01-01

Journal of Food Process Engineering

Abstract:The study focuses on describing the microwave drying characteristics of kidney beans and discussing the effect of drying power and initial mass on drying quality. When the power level increased, the dehydration rate increased while the drying energy consumption and the initial mass decreased. There were two falling rate periods during drying of kidney beans. The first falling rate period was at a moisture content of more than 2.0 (dry basis [d.b.]), and the second falling rate period was at a moisture content of less than 2.0 (d.b.). The same water loss will consume more energy when the moisture content is less than 2.0 (d.b.). The quadratic orthogonal regression experiment was conducted, and models of effect of first-stage drying load-power, second-stage drying load-power and first-stage drying time on sensory quality, rehydration ratio and energy consumption rate (three indices) were established. First-stage drying load-power, second-stage drying load-power and first-stage drying time affected the three indices. For the three indices, the drying factor combination is different. First-stage drying load-power is slightly lower for high sensory quality. Second-stage drying load-power should be lower for high sensory quality and higher for low energy consumption rate. First-stage drying timeshould be long for high sensory quality and moderate for low energy consumption rate and high rehydration ratio. To obtain better results for the three indices, the first-stage power should differ from the second-stage power in drying factor combination. This implies that the alternative microwave power drying on kidney beans should be used.