Abstract:The influence of different wind speeds and sealed curing time on early-age shrinkage of cement paste was investigated. The 72-h early-age total shrinkage of cement paste after sealed curing for 0 h, 3 h, 6 h, 9 h, 12 h, and 24 h starting from the initial setting time under different wind speeds was studied. Water loss, autogenous shrinkage, tensile strength, pore size distribution (PSD) and hydration degree were measured. Elastic modulus, cracking strain, and radius of the pores where the meniscus forms were calculated based on the data obtained. For mixtures that did not undergo sealed curing, the wind speed could considerably increase the drying shrinkage and total shrinkage of the cement paste. The wind speed also reduced the early tensile strength, hydration degree, and elastic modulus of the cement paste. Within 1 day, the cracking strain was reduced by wind speed. According to the experimental data, a fitting formula for the early total shrinkage of cement paste is proposed, and the wind speed influencing factor beta(w) is also proposed for the first time. Considering the PSD and water loss to study the mechanism of early drying shrinkage of cement paste, we found that there is a good correlation between r(s) and drying shrinkage. The exponential formula is given between r(s) and drying shrinkage. For mixtures with sealed curing, the total shrinkage and water loss decreased with increasing sealed curing time. However, the effects of water loss at different stages on drying shrinkage were different. Water evaporation in the early stage led to more drying shrinkage than water evaporation in the later stage. Sealed curing also weakened the increasing effect of wind speed on total shrinkage, so that at the same wind speed, the shrinkage increment was considerably reduced. After analysis and comparison, it was found that it is economical and reasonable to adopt sealed curing for 6 or 9 h, which can effectively decrease the early total shrinkage and improve the cracking strain of the cement paste in the wind environment. (C) 2020 Elsevier Ltd. All rights reserved.

Chemical shrinkage and electrical resistivity of cement at early age

The Early-Age Drying Shrinkage of Cement-Based Materials with the Same Workability after Temperature Compensation

Is Early Drying Shrinkage Still Determined by the Mesopore Content? A Case Study of Cement Paste with Minerals

Influence of Superplasticizers on Early Age Drying Shrinkage of Cement Paste with the Same Consistency

Influence of evaporation rate on pore size distribution, water loss, and early-age drying shrinkage of cement paste after the initial setting

Influence of Superplasticizer Type and Dosage on Early-age Drying Shrinkage of Cement Paste with Consideration of Pore Size Distribution and Water Loss

Unveil the Role of Nano-Caco3 in Early Shrinkage and Tensile Properties of Cement Paste: from Experimental Work to Modeling

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Effect of Different Wind Speeds and Sealed Curing Time on Early-Age Shrinkage of Cement Paste

Influence of Mineral Admixtures on early Shrinkage of Ordinary Concrete

Relationship Between Buck Electrical Resistivity and Drying Shrinkage in Cement Paste Containing Expansive Agent and Mineral Admixtures

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Measurement of Chemical Shrinkage of Cement Paste: Comparison Study of ASTM C 1608 and an Improved Method

Correlation of Mechanical and Microstructure Development of Early-Age Concrete by Electrical Resistivity Measurement

Prediction of the Chemical Shrinkage of Portland Cement

Monitoring of Hydration Using the Electrical Resistance of Carbon Fiber Reinforced Cement Materials

Influence of Recycled Cement Paste Powder on Early-Age Plastic Shrinkage and Cracking of Cement-Based Materials

Chemical Shrinkage of Low Water to Cement (w/c) Ratio CEM I and CEM III Cement Pastes Incorporating Silica Fume and Filler

A study on the hydration of calcium aluminate cement pastes containing silica fume using non-contact electrical resistivity measurement

Effects of microstructure and pore water on electrical conductivity of cement slurry during early hydration

Monitoring the hydration behavior of hardened cement paste affected by different environmental pH regimes