Abstract:<p>Polypropylene (PP) has been commonly used as packaging materials due to the favorable mechanical and optical properties related to its diverse and complex chain microstructure which can be better understood through effective fractionation. In this work, two commercial PP resins (A and B) with similar bimodal melting temperature distribution in the range of 100–160 °C but different ethylene content (9.1–12.3 mol%) are fractionated by preparative temperature rising elution fractionation (P-TREF) and relevant fractions are characterized by a variety of techniques such as high temperature-gel permeation chromatography (HT-GPC), differential scanning calorimetry (DSC), <sup>13</sup>C nuclear magnetic resonance (NMR) spectroscopy, Fourier transform-infrared (FT-IR) spectroscopy, and wide-angle X-ray diffraction (WAXD). The chain microstructures of the two resins used as food packaging film exhibit heterogeneity and some differences, which are mainly caused by broad and different distribution of ethylene comonomers. Resin B contains more ethylene units than resin A, and the ethylene units are incorporated into the PP chains in the forms of individual unit or very short segments, resulting in large amount of fractions with relatively low isotacticity and crystallinity that eluted at the temperature range of 35–90 °C. These fractions account for 84.07 wt% of resin B, whereas 59.66 wt% of resin A. The propylene sequences of different isotacticity and crystallinity generated by the insertion of ethylene comonomers in resin B are mainly responsible for its biomodal melting behavior. However, ethylene comonomers tend to insert into the PP chains of resin A in the forms of long polyethylene (PE) blocks and generate propylene−ethylene block copolymers with high crystallizability which can be eluted at high temperatures of 120–140 °C. These fractions constitute 3.16 wt% of resin A, but barely exist in resin B. Moreover, 35.83 wt% of resin A were eluted at 110 °C, whereas only 13.22 wt% of resin B can be eluted at this temperature. These fractions with high isotacticity and molecular weight eluted at high temperatures contribute to the higher flexural modulus of resin A. Both long ethylene blocks and propylene sequences of different lengths contribute to the biomodal melting peaks on the thermogram of resin A.</p>

The Melt Rheology of Poly(Propylene Carbonate)

Polymorphous Crystallization And Multiple Melting Behavior Of Poly(L-Lactide): Molecular Weight Dependence

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

The Influence of Calcium Carbonate on the Mechanical Properties and Phase Morphology of PA6/PP Blend

Rheological Properties and Morphological Evolutions of Polypropylene/Ethylene-Butene Copolymer Blends

THE DYNAMIC RHEOLOGICAL CHARACTERIZATION OF STRUCTURE DEVELOPMENT FOR IMPACT POLYPROPYLENE COPOLYMER MELT

Construction of CO2‐based thermoplastic elastomer via combining aliphatic polycarbonate and polyamide: A multiblock copolymer PPC‐mb‐PA6

Interrelation of macroscopic mechanical properties and molecular scale thermal relaxation of biodegradable and non-biodegradable polymers

Shear relaxation behavior for degraded polypropylene melt in torque rheometer

Improved molecular chain constraint of poly (propylene carbonate) composites by the synergistic effect of poly (vinyl alcohol) and carbon nanotubes

Comparison of chain microstructure between two propylene−ethylene copolymer resins with bimodal melting temperature distribution

Enabling Design of Strong and Tough Poly(Propylene Carbonate) Through In Situ Generated Poly(Propylene Carbonate)‐Based Cross‐Linked Microdomains

Influence of Shearing on Impact Polypropylene Copolymer: Phase Morphology, Thermal and Rheological Behavior

Effect of Morphology Development on the Low‐temperature Tensile Properties of PP / POE Blends

Study on Degradation and Crosslinking of Impact Polypropylene Copolymer by Dynamic Rheological Measurement

Improving Thermal Stability of Biodegradable Aliphatic Polycarbonate by Metal Ion Coordination

Blends of Poly(β-hydroxybutyrate) with Poly(propylene carbonate)

Relationship between molecular structure, crystallization behavior, and mechanical properties of long chain branching polypropylene

Influence of Different Molecular Weights and Concentrations of Poly(glycidyl methacrylate) on Recycled Poly(ethylene terephthalate): A Thermal, Mechanical, and Rheological Study

Investigation of Crystallization, Morphology, and Mechanical Properties of Polypropylene/Polypropylene-Polyethylene Block Copolymer Blends