Abstract:Larger-sized primary carbides lead to stress concentration during the application of H13 hot-work die steel, resulting in microcracks and fatigue failure. Rare earth was usually added to modify the carbides and inclusions. The existing literature is reviewed on the effect of rare earth on primary carbides in H13 steel. A comprehensive review on the effect of rare earth on the characteristics of primary carbides, i.e., number, size, morphology, and thermal stability in H13 steel, was done. The precipitation mechanism and nucleation of primary carbides with rare earth were summarized. The position and form of rare earth in steel and their effects on alloying elements segregation were reviewed. The addition techniques of rare earth in H13 steel were compared, and the prospects for other uncommon rare earth and emerging technology were present. Based on the current references, it can be known that adding rare earth facilitated refined and dispersed primary carbides. The size of primary carbides would be reduced, and their morphology would be improved because the rare earth inclusions formed in H13 steel can act as nucleation cores for γ-Fe or δ-Fe, refining the dendritic structure. Besides, the number of primary carbides at grain boundaries would be significantly reduced. However, rare earth had little impact on thermal stability. The nucleation of primary carbides tended to be inhibited due to the modification of inclusions by rare earth which were likely to be nucleation cores for primary carbides. Rare earth had been reported to affect the mechanism and process of primary carbide precipitation. Additionally, the addition of rare earth can inhibit the segregation of alloying elements and carbon diffusion by calculation. Thus, laboratory experiments and theoretical calculations need to be conducted to study the states and evolution of rare earth steels.

High-Temperature Wear of Cast Hot-Forging Die Steel Modified by Rare Earth

Influence of RE Compound Modification on the Toughness of Casting High Speed Steel Die

High Temperature Wear Characteristics of a New Hot Work Die Steel CH95

Rare earth addition powered corrosion resistance of the surface oxide film on GCr15 bearing steel substrate

Effect of rare earth on primary carbides in H13 die steel and their addition method: a review

Study on sliding friction and wear behavior of M50 bearing steel with rare earth addition

Effect Of Rare Earth Metals On The Microstructure And Impact Toughness Of A Cast 0.4c-5cr-1.2mo-1.0v Steel

Bending Strength and Wear Behavior of Fe-Cr-C-B Hardfacing Alloys with and Without Rare Earth Oxide Nanoparticles

Effects of Rare Earth on the Heat Resistance of Ni-Mo Cast iron in Permanent Mould

Effect of Ti and rare earth on microsegregation and large-sized precipitates of H13 steel

Influence of Rare Earth Nanoparticles and Inoculants on Performance and Microstructure of High Chromium Cast Iron

Influence of Re-Ti Modification on the High Impact Wear Resistance of High Si Bainitic Cast Steel

Influence of Rare Earth Addition on Microstructure and Properties of the High Strength Cast Steel

Microstructure and Mechanical Property of Deposited Metal of Low-alloy Wear-resistance Steel Electrode with RE

Effect of Feeding Ca–Mg–RE–Zr Composite Cored Wire During Refining of Liquid Steel on Abrasive Wear Resistance of High-Strength Steels

A Novel Design to Enhance the Tribological Properties of High‐Cr Hot Work Die Steel via Trace TiC Ceramic Nanoparticles

Microstructure and properties of typical equiatomic CrMnFeCoNi high entropy alloy doped with different rare earth elements

Study of Work Function and Dry Sliding Wear Behavior of Fe-Based Hardfacing Alloys with and Without Nano Rare Earth Oxides

High-temperature oxidation wear performance and mechanism of Cr–Mo (W)–V hot-work die steel

Effect of Rare Earth and Titanium Additions on the Microstructures and Properties of Low Carbon Fe–B Cast Steel

Study of High Temperature Wear Resistance of Hot Work Steel for Magnesium Alloy Die Casting