Abstract:Emissivity information derived from thermal infrared (TIR) hyperspectral imagery has the advantages of both high spatial and spectral resolutions, which facilitate the detection and identification of the subtle spectral features of ground targets. Despite the emergence of several different TIR hyperspectral imagers, there are still no universal spectral emissivity measurement standards for TIR hyperspectral imagers in the field. In this paper, we address the problems encountered when measuring emissivity spectra in the field and propose a practical data acquisition and processing framework for a Fourier transform (FT) TIR hyperspectral imager—the Hyper-Cam LW—to obtain high-quality emissivity spectra in the field. This framework consists of three main parts. (1) The performance of the Hyper-Cam LW sensor was evaluated in terms of the radiometric calibration and measurement noise, and a data acquisition procedure was carried out to obtain the useful TIR hyperspectral imagery in the field. (2) The data quality of the original TIR hyperspectral imagery was improved through preprocessing operations, including band selection, denoising, and background radiance correction. A spatial denoising method was also introduced to preserve the atmospheric radiance features in the spectra. (3) Three representative temperature-emissivity separation (TES) algorithms were evaluated and compared based on the Hyper-Cam LW TIR hyperspectral imagery, and the optimal TES algorithm was adopted to determine the final spectral emissivity. These algorithms are the iterative spectrally smooth temperature and emissivity separation (ISSTES) algorithm, the improved Advanced Spaceborne Thermal Emission and Reflection Radiometer temperature and emissivity separation (ASTER-TES) algorithm, and the Fast Line-of-sight Atmospheric Analysis of Hypercubes-IR (FLAASH-IR) algorithm. The emissivity results from these different methods were compared to the reference spectra measured by a Model 102F spectrometer. The experimental results indicated that the retrieved emissivity spectra from the ISSTES algorithm were more accurate than the spectra retrieved by the other methods on the same Hyper-Cam LW field data and had close consistency with the reference spectra obtained from the Model 102F spectrometer. The root-mean-square error (RMSE) between the retrieved emissivity and the standard spectra was 0.0086, and the spectral angle error was 0.0093.

Fourier Transform Spectrometer for Spectral Emissivity Measurement in the Temperature Range Between 60 and 1500°C

Measurement System for FT-IR Infrared Spectral Emissivity of Solid Surface at Ultra-High Temperature

Measurement of High-Temperature Spectral Emissivity Using Integral Blackbody Approach

Apparatus for Measuring Spectral Emissivity of Solid Materials at Elevated Temperatures

Precision Measurement Facility Of Mid-Infrared Spectral Emissivity Measurement

Measurement of Directional Spectral Emissivity at High Temperatures

Simultaneous measurement of normal spectral emissivity and temperature of materials with low thermal conductivity

Experimental research on the spectral emissivity measurement based on FTIR

An Apparatus for Spectral Emissivity Measurements of Thermal Control Materials at Low Temperatures

New experimental device for high-temperature normal spectral emissivity measurements of coatings

A New Emissivity Measuring Apparatus Based on Infrared Thermal Imager

Measurement of Spectral Emissivity Based on FT-IR

[The Linearity Analysis of Ultrahigh Temperature FTIR Spectral Emissivity Measurement System].

Field-Based High-Quality Emissivity Spectra Measurement Using a Fourier Transform Thermal Infrared Hyperspectral Imager.

An in Situ Online Methodology for Emissivity Measurement Between 100 °C and 500 °C Utilizing Infrared Sensor

An Emissivity Measurement Apparatus for Near Infrared Spectrum

Measurements of Temperature and Emissivity Distributions on a High-Temperature Surface Using an Auxiliary Light Source Method

Research On Measurement Of Spectral Emissivity Based On Fourier Infrared Spectrometer

Field Measurement of the Spectral Emissivity of Terrestrial Surface Materials with the Fourier Transform Infrared Spectrometer

Measurements of the directional spectral emissivity based on a radiation heating source with alternating spectral distributions

Initial Study of A New Method for Measuring the Temperature of Hot Gas by Ftir Spectrometry