Abstract:Downhole acoustic telemetry (DAT), using a long drill string with periodical structures as the channel, is a prospective technology for improving the transmission rate of logging while drilling (LWD) data. Previous studies only focused on the acoustic property of a free drill string and neglected the coupling between pipes and fluid-filled boreholes. In addition to the drill-string waves, a series of fluid waves are recorded in the DAT channel, which has not been investigated yet. Unpredictable channel characteristics result in lower transmission rates and stability than expected. Therefore, a more realistic channel model is needed considering the fluid-filled borehole. In this paper, we propose a hybrid modeling method to investigate the response characteristics of the DAT channel. By combining the axial wavenumbers and excitation functions of mode waves in radially layered LWD structures, the channel model is approximated to the 1-D propagation, which considers transmission, reflection, and interconversion of the drill-string and fluid waves. The proposed 1-D approximation has been well validated by comparing the 2-D finite-difference modeling. It is revealed that the transmitted and converted fluid waves interfere with the drill-string wave, which characterizes the DAT channel as a particular coherent multi-path channel. When a fluid-filled borehole surrounds the drill string, the channel responses exhibit considerable delay as well as strong frequency selectivity in amplitude and phase. These new findings suggest that the complexity of the channel response has been underestimated in the past, and therefore channel measurements on the ground are unreliable. To address these channel characteristics, we apply a non-coherent demodulation strategy. The transmission rate for synthetic data reaches 15 bps in a 94.5 m long channel, indicating that the acoustic telemetry is promising to break the low-speed limitation of mud-pulse telemetry.

Analysis of Down-Hole Remote Telemetry Methods in Oil Well Testing.

Study on Surface Readout of Downhole Pressure and Temperature in Wireline Remote Telemetry

Electromagnetic Coupling-Based Downhole Remote Telemetry In Well Testing

A Novel Lateral Resistivity Logging-While-drilling (LWD) Method in Oil-Based Drilling Fluid

The Resistivity Imaging LWD Method Suitable for Oil-Based Drilling Fluid

Analysis of OFDM modulation method and experiment for acoustic transmission system along drill strings

Signal detection of lateral resistivity LWD based on C4D technique with oil-based drilling fluid

Coreless Electromagnetic Coupling-Based Drillstem Telemetry Using Dual Electronic Gauges

Analysis and Experimental Research on the Factors Affecting Downhole Inductive Electromagnetic Wave Wireless Short-Hop Transmission

Experimental Analysis of Acoustic Transmission Characteristics along the Periodic Simulated Drillstring

Analysis of EM channel of producing well

Research and Application of Downhole Remote Wireless Control Technology Based on Gas Pressure Wave in Tubing

Response analyses on the drill-string channel for logging while drilling telemetry

Analysis of Signal Transmission for Use of Logging While Drilling

RESEARCH ON THE MEMORY SRO TELEMETERING SYSTEM USED FOR DRILL STEM TESTING

Design of Acoustic Wireless Remote Transmission System for Logging-While-drilling Data

Improved Methods for Acoustic Transmission along the Drill String and Other Periodic Media

Signal wireless transmission behaviors along the drillstring using extensional stress waves

Research on the Development Method of High Reliability Downhole Communication System

Induction Logging Through Casing by Detecting Lateral Waves: A Numerical Analysis

Characteristics Analysis of Joint Acoustic Echo and Noise Suppression in Periodic Drillstring Waveguide