Abstract:Herein, a series of alumina supports were prepared by rehydration-dehydration of the traditional gamma-Al2O3 under different hydrothermal temperatures. After loading CoMo species, it was found the selectivity factor of corresponding CoMo/Al2O3 catalysts was improved greatly from 1.21 to 2.51 with the increased hydrothermal temperature of alumina supports in the hydrodesulfurization (HDS) of a model fluid catalytic cracking (FCC) naphtha. The improved HDS selectivity is attributed to the weakened metal-support interaction and lowered dispersion of MoS2 particles, resulting in catalysts with larger edge-to-corner ratios of CoMoS slabs ((f(e)/f(c))(CoMo)). Besides, the recombination mercaptans formed by reaction of produced H2S and olefins were found as a big challenge to reach a high HDS conversion (S < 10 ppm) when only using the selective HDS catalyst (one-unit process). Therefore, a two-unit process has been developed by using a selective HDS catalyst to remove the most of the refractory sulfur compounds firstly, after which using another mercaptan-removing catalyst to deal with the recombination mercaptans specially. The catalytic results show that the two-unit process has a smaller olefin loss (4.38 v%) than that of one-unit process (7.08 v%) when reducing the sulfur concentration of a heavy FCC fraction to less than 10 ppm, thus resulting in a 0.7 unit less of the research octane number loss. The present work shows that high HDS conversion and low olefin hydrogenation conversion in selective HDS of FCC gasoline can be achieved through optimization design of both the selective HDS catalyst and the whole technology.

Catalytic Transformation Performance and Mechanism Study of Sulfur - Containing Compounds over Nano - HZSM - 5 Catalyst

THE HYDRODESULFURIZATION PATHS OF FCC GASOLINE SULFIDES ON ZSM-5 CATALYST

Catalytic Transformation Performance of Sulfides on OTA Catalyst

Effect of Methanol on Catalytic Performance of Hy Zeolite for Desulfurization of Fcc Gasoline by Alkylation

Catalytic Mechanism of MCM-41 Supported Phosphoric Acid Catalyst for FCC Gasoline Desulfurization by Alkylation: Experimental and Theoretical Investigation

Molecular Level Simulation of the Conversion and Distribution of Sulfides in the Fluid Catalytic Cracking and Hydrotreating Processes to Improve the Cleanliness of Gasoline and Diesel

SUPER DESULFURIZATION COMBINED TECHNOLOGY OF FIBER FILM OXIDATIVE EXTRACTION-PHOTOCATALYSIS FOR FCC GASOLINE

Conversion of Hydrocarbons over Nano-Hzsm-5 Catalysts

Transformation of Syngas to Light Hydrocarbons over Bifunctional CuO–ZnO/SAPO-34 Catalysts: the Effect of Preparation Methods

FCC Gasoline Desulfurization Through Oxidation and Extraction

Study on Alkylation of Thiophenic Sulfur in FCC Gasoline Using Hβ Zeolite

STUDY ON HYDROGENATION OF UNSATURATED HYDROCARBON DURING FCC GASOLINE DESULFURIZATION BY S Zorb PROCESS

The Adsorption and Catalytic Cracking of C8 Hydrocarbons on HZSM-5 Zeolite

Study on the Additive for Desulfurization in FCC Gasoline

STUDY ON THE CATALYTIC REACTIONS OF FCC NAPHTHA OVER OTA CATALYST

Synthesis of Ni( ii )-phosphotungstic acid/nanocrystalline HZSM-5 catalyst for ultra clean gasoline in a single-stage reactor

Removal of Sulfur Compounds from FCC Gasoline by Olefinic Alkylation of Thiophenic Sulfur over Solid Acid Catalyst

Study on hydrodesulfurization of catalytic cracking gasoline on Mo-Co catalyst

Optimizing Both the CoMo/Al2O3 Catalyst and the Technology for Selectivity Enhancement in the Hydrodesulfurization of FCC Gasoline

The Continuous Desulfurization of Fcc Gasoline Through Extraction and Photocatalysis-Oxidation

Study on Olefin Alkylation of Thiophenic Sulfur in FCC Gasoline Using La 2 O 3 -Modified HY Zeolite