Abstract:Purpose The six-axis force/torque sensor based on a Y-type structure has the advantages of simple structure, small space volume, low cost and wide application prospects. To meet the overall structural stiffness requirements and sensor performance requirements in robot engineering applications, this paper aims to propose a Y-type six-axis force/torque sensor. Design/methodology/approach The performance indicators such as each component sensitivities and stiffnesses of the sensor were selected as optimization objectives. The multiobjective optimization equations were established. A multiple quadratic response surface in ANSYS Workbench was modeled by using the central composite design experimental method. The optimal manufacturing structural parameters were obtained by using multiobjective genetic algorithm. Findings The sensor was optimized and the simulation results show that the overload resistance of the sensor is 200%F.S., and the axial stiffness, radial stiffness, bending stiffness and torsional stiffness are 14.981 kN/mm, 16.855 kN/mm, 2.0939 kN m/rad and 6.4432 kN m/rad, respectively, which meet the design requirements, and the sensitivities of each component of the optimized sensor have been well increased to be 2.969, 2.762, 4.010, 2.762, 2.653 and 2.760 times as those of the sensor with initial structural parameters. The sensor prototype with optimized parameters was produced. According to the calibration experiment of the sensor, the maximum Class I and II errors and measurement uncertainty of each force/torque component of the sensor are 1.835%F.S., 1.018%F.S. and 1.606%F.S., respectively. All of them are below the required 2%F.S. Originality/value Hence, the conclusion can be drawn that the sensor has excellent comprehensive performance and meets the expected practical engineering requirements.

Study of Principle of a 6-DOF Accelerometer

Modeling of a Six-Degree-of-freedom Magnetic Levitation Platform Actuated by Noncontact Lorentz Forces

Calibration of 6-DOF Parallel Mechanism Using Joint Force Sensors

Six-axis Force/Torque Sensor Based on Stewart Platform

Design and analysis of parallel six-dimensional force sensor based on near-singular characteristics

The Force Control Method Based on 6-DOF Parallel Electro-hydraulic Servo Mechanism

Accurate mechanical-optical theoretical model of cross-axis sensitivity of an interferometric micro-optomechanical accelerometer

The Device for Calibration Based on the Six-freedom of Generalized Force

Design of Electrostatic Levitation Loop for Six-Axis Micromachined Accelerometer

Gravity compensation and output data decoupling of a novel six-dimensional force sensor

Development of a six-axis force/moment sensor for wind tunnel model test

Multiple-Degree-of-Freedom Modeling and Simulation for Seismic-Grade Sigma-Delta MEMS Capacitive Accelerometers

Optimizations of structure stiffnesses and sensitivities of Y-type six-axis force/torque sensor

A Novel Angular Acceleration Sensor Based on the Electromagnetic Induction Principle and Investigation of Its Calibration Tests

A comprehensive modeling of a 6-axis single proof mass MEMS-based piezoelectric IMU

Design and Optimization of Elastic Structure of Miniature Six-Dimensional Force/Torque Sensor

Structural Design and Static Calibration of Six-axis Force/Torque Sensor

Optimization design and key-term separation identification of parallel six-dimensional pose sensor with high sensitivity and high precision

Design and Research of Three-dimension Acceleration Sensor Based on Measuring Strain

Design and Simulation of Capacitive, Piezoresistive and Piezoelectric Triaxial Accelerometers Using a Highly Symmetrical Quad-Beam Structure